|06-04-2012 04:46 PM|
|stykthyn||I would HIGHLY suggest getting the master/slave kit. everything comes together as said and there is no bleeding to be done. its all bolt and go.|
|06-04-2012 03:23 PM|
Is it really that easy to do? After my 95 heats up the clutch squeaks when pushing in the pedal and first gear is sort of hard to get into. The worst part is that the whole jeep sometimes lurches when taking off from a dead stop.
I do a lot of my work, but have never done a clutch before.
|06-03-2012 06:37 PM|
|06-03-2012 08:10 AM|
Clutch Problem 95 rio grande
Here is my issue. I have a 1995 rio grande with the 2.5L. Sometimes when I am at a stop light, especially on hotter days it seems, my jeep wants to pull itself while I have the clutch engaged. It makes it very hard to pull out of 1st gear and switching from 1st to 2nd is a pain, but all other gears are fine. Again this only happens sometimes and on warmer days. I have thought about replacing the entire clutch system, but I am hoping it is something less expensive.