|06-25-2012 07:56 AM|
|06-25-2012 01:25 AM|
|Rawkon||1.75 .120, if you use a stock bumper add an inlay and box the ends. if not it will bend and peel.|
|06-24-2012 09:29 PM|
|pasteris71||Would this fit on a stock bumper? Looks awesome and would love to be. Me to direct bolt to my stock bumper.|
|06-24-2012 06:06 PM|
I build 2" tube stinger/bumpers that are completely bolt on & come with grade 8 bolts. The angle I use is made for TJ's with 33" tires. I normally build them with a 36" stinger hoop, and with a winch hook at the top. my stingers are like none I've seen before. if your interested PM me for shipping rates and to talk about the size of your hoop. The stingers I build have a wall thickness of .250. and weigh much less then a smittybuilt stinger/bumper. here is a picture of one of my first stinger/bumpers.
|06-22-2012 09:16 PM|
|06-22-2012 09:07 PM|
|06-22-2012 06:53 PM|
|heatherbaby87||I have a stinger bumper for sale, can email or message pics. I just removed from my jeep because its mostly driven on road and wanted something more friendly for that use. Let me know of interest. Will take best offer plus shipping cost if necessary. No low ballers please. Thanks.|
|06-20-2012 12:23 PM|
|06-20-2012 12:20 PM|
|TJNewbie||Both of those have the 2" bars?|
|06-20-2012 09:53 AM|
|06-19-2012 11:54 PM|
|06-19-2012 10:32 AM|
|Ibuildembig||I used 2" HREW on the ones I built and stood my 5K pound truggy on it several times without fail.|
|06-19-2012 07:12 AM|
|TJNewbie||Those look beefy! Nice job|
|06-18-2012 11:15 PM|
If you want it all to match, find the sliders you want.... match the tubing for your stinger.
I haven't built my stinger yet, but I have modified my Rubi Rockers with sliders using 1.75" .120 wall DOM.
|06-18-2012 09:26 PM|
|TJNewbie||Thanks. I'm not sure, but I will ask. that was another thing I would like the sliders and front bumper tubing to match. When I originally asked, they did say it was DOM tubing and the 1.75" was .120 wall thickness, but I don't know what the 2" tubing was|
|06-16-2012 09:31 PM|
What type of tubing is the question and what other tubing do you have, if any ? I'm going with 1.75" DOM .120 wall
Wall thickness is another area to be looking at. If you had .250 wall... against .120 wall... I would go .120 for weight. .120 DOM is plenty for a stinger
The choice is yours if the tubing is seamless ( DOM ) I have 1.75" DOM Sliders that will match... that is my choice for me.
|06-16-2012 06:35 PM|
1.75" or 2" stinger tube
I'm having a stinger welded to a front bumper, and I have a choice of 1.75" or 2" tubing, Both look pretty good to me, but is one better than the other?