|09-09-2013 11:04 PM|
Dragging up this thread....looking underneath pondering a flat bottom....2 thoughts arise....
Tucking it all up, is there still room in there for the cat converter? Or is it just up really friggin tight to floor? Any heat issues then? (assuming the heat shield will still be there)
And also ( maybe a stupid question...) why not just get some metal from the shop instead of buying a skid kit? Or am I missing something here? Besides buying a low-pro mount.
|08-07-2013 07:06 PM|
|Tila TJ||Ok good thanks. I was just worried the AA maybe be too long. Guess I'll find out lol. Thanks all|
|08-06-2013 10:36 PM|
|jeepers29||I got a super short shaft from Tom woods. It was made by Teraflex, I do believe. I also got my shaft from Tom as well.|
|08-06-2013 10:07 PM|
With 3 inches of lift and a completely flat custom skid I don't have any. I'm literally an inch from having bind at full droop. If you have the change get the super short. I will probably be swapping to a SS and lengthing the DS or modifying my driveshaft for more clearance in the future.
JB sye is great, AA is next, but really they all get the job done.
|08-06-2013 09:54 PM|
|08-06-2013 09:17 PM|
|Tila TJ||Well, I did the AA SYE, but now I'm wondering.....am I gonna have DC bind when I do a tummy tuck?|
|06-19-2012 12:35 PM|
|06-19-2012 10:17 AM|
I went with an SYE from Advance Adapters and am happy with it, but if I had to do it over again, I'd go with one from JB Conversions. Read their site and you'll see why. The main reason is so that I could get a "Super Short" SYE, which allows you to run a bit longer drive shaft.
At the time I didn't understand why that would be desirable, but now that I've got 4" of suspension lift and a tummy tuck, I see the value.
|06-19-2012 09:57 AM|
|Tila TJ||K. Thanx!|
|06-18-2012 10:45 PM|
Tom Wood (no 's')
He can explain the process and how to measure and all that good stuff.
|06-18-2012 08:51 PM|
|doclouie||Call Tom Woods and you can get both the shaft and SYE all at once.|
|06-18-2012 08:45 PM|
|ShakaZulu8402||Advance Adapters or JB conversions.|
|06-18-2012 08:03 PM|
97 TJ 4 cylinder 5 speed 4" lift. Going to do the sye. What are the recommended brands to use? Which not to use?