|06-19-2012 04:49 AM|
Thanks for the advice guys, think it's solved.
A friendly local Jeeper is going to give me one of his (used) OEM bolts
|06-18-2012 11:08 PM|
|blue6tj||I spend a lot of time in Ship Yards in Spain, fabrication is pretty cheap. Go to a machine shop and get them to make you one... Probably cost about $15-20 USD to make up... Sometimes it's easier to pay a little bit more and get the job completed than to mess around for a while and have nothing done at all...|
|06-18-2012 11:02 PM|
|Black Magic Brakes||
You can do the same thing with a grade 8 bolt and nut. I have many of them, but shipping to Spain may not make it worthwhile for a 10 cent bolt.
|06-18-2012 01:17 PM|
|Tonycrd||Yep, only through Jeep can I find this bolt..|
|06-18-2012 01:04 PM|
So if it's not metric...is it SAE?
Just saw that you are in Spain, so Im guessing it may be kind of hard to come across SAE bolts.
|06-18-2012 01:03 PM|
Oh dear, broke a bolt...D30
Hi guys, I tried to adjust the steering knuckle stop and one of the bolts snapped.
It's not metric so now I'm lost overhere.
Anyone have one of these lying around?