|06-27-2012 08:07 AM|
|Imped||In the future, just keep the centering ball greased. I believe Tatton's sends out all of their shafts with greasable Spicer centering balls. I grease both the front and rear after every wheeling trip and every 3k miles. It's especially important if you daily drive or flat-tow the rig. That's a major mistake people make--that centering ball is doing a lot of work and needs to be kept lubed up.|
|06-27-2012 06:36 AM|
|dabolt55||Great that you found it quick. Keep it going...|
|06-27-2012 06:31 AM|
Found the problem.
Glad to hear I thought I was going to have to tear the transfer case apart. I started the diagnostics and found that my CV joint in my rear driveline was squealing. Looks like it dried out and heated up the rubber seal. Just sent it back to Tallon's Driveline Service for repair. Just a coincidence it started during towing. Thanks!
|06-27-2012 06:26 AM|
|TnDz TJ||makes no difference...|
|06-27-2012 03:11 AM|
|ALASKA99TJ||i agree with imped|
|06-26-2012 03:03 PM|
|Imped||No, the transfer case doesn't know or care if you've got a slip or fixed yoke rear output.|
|06-26-2012 02:43 PM|
Does towing with a slip yoke eliminator (SYE) cause transfer case problems
Does anybody know if towing with a slip yoke eliminator causes transfer case problems. I just did 300 miles and now have a squeal from the output bearing area.