|07-04-2012 03:52 PM|
|07-04-2012 03:38 PM|
|07-04-2012 12:40 PM|
|TJallday97||I have a 4in rc short arm on my jeep.....its not bad has good flex you will need an sye and a cv driveshaft though......also if the kit doesnt come with extended steel breaklines thats a good choice......sway bars are overrated and i took mine off as soon as i figured out how much more awesome rocks are than mud......the track bar would be nice adjustable and again i believe rc offers that.....but you should be alright.....and everybody says you need to regear or get new axles for 33s but thats not true i run 33s on stock axles and gears and it works fine and i do not have any issues dont get me wrong though beefer axles and gears would be awesome but i dont have the money for it and for what i run everything is solid and runs fine......goodluck with the lift pics when your done!|
|07-04-2012 11:43 AM|
|07-04-2012 11:23 AM|
|JeepMA||3.25" Suspension Lift Kit for 97-06 Jeep TJ by Rough Country- this is the lift that i plan on getting. it comes with steering stabilizers so ill probably only need to buy sway bars right? or do i definitely need wheel spacers?|
|07-03-2012 07:40 AM|
|UnlimitedLJ04||Figure on many of the following components: longer front brake lines, extended sway bar links front and rear, regearing, brake and steering upgrades to accommodate larger tires, SYE, CV shaft, bumpstop extensions, new springs, new shocks, welding/fabrication a few reinforcement brackets, adjustable track bars, and a rear track bar relocation bracket.|
|07-03-2012 05:28 AM|
What lift are you buying?
I bought my lift from the Rough Country website and it told me what was recommended for my lift right there.
|07-02-2012 03:44 PM|
|Donkerz||Nah no axles needed, you might need a slip yoke eliminator to stop driveline vibration since the lift is over 3" (doesn't always happen tho" , you might need new brake lines and definitely new shocks. Getting a Coil spring kit as well?|
|07-02-2012 11:32 AM|
if i am going to put a 3.25 lift kit on my 2001 wrangler what else to i need to buy? i know i need steering stabilizers but do i need new axles or anything else?