|07-15-2012 01:50 PM|
|WranglerJR83||I would suggest you working on that steering issue. The scariest thing to happen in a Jeep is to have your steering all sloppy when your driving down the road. Who care what it looks like, make it safe and strong.|
|07-15-2012 01:42 PM|
I have a jeep that was in new york for a few years and it's really rusted around the center body mounts. Would it be a good idea to just weld a sleeve around the rust holes and replace the mounts?
Any experience with that?
|07-06-2012 07:34 PM|
|07-06-2012 02:49 PM|
|07-05-2012 02:51 PM|
|07-05-2012 02:49 PM|
|woodsy||wow thanks for all the responses guys! The frame isnt to the point that it would warrant a frame off resto yet i believe it can still be saved i will just be reinforcing the shackle points and body monts for now. Also where do i get that KBS stuff? anyone else try it? ive never heard of it...but i do have a welder at my disposal. Yes the frame is the main concern and will be addressed first. Then the tune up and somewhere down the line hopefully soon i can repair the rust! But the frame will most likely eat up a majority of my cash in steel.|
|07-05-2012 11:49 AM|
Yea, i guess you can use a stick welder, I just dont like having to stop, change the stick, or try to restart an old stick.
Mig is so much easier, and, like a monkey, i like it easier.
|07-05-2012 09:27 AM|
|DoodleJeep||A Lincoln 225s has enough to weld the frame. You can pick them up all day on craigslist for under $300. I have welded some serious stuff with one. Built a fifth wheel trailer with one.|
|07-04-2012 05:42 PM|
|MichiganWrangler||Your Jeep looks pretty familiar... Happen to be around the Howell/Fowlerville part of Michigan? But I say get that rust fixed. I need to get mine fixed so I can put on my plastic Rocker Guards and quarter guards on :/. Also a screw on my gas cap is stripped... no idea how I will get that out....|
|07-04-2012 05:34 PM|
You need a welder that will penetrate the metal, not just make a pretty bead, Gas and wire costs are enough to put you over the $300 mark (if new).
|07-04-2012 07:14 AM|
|07-03-2012 11:41 PM|
|OverkillYJ||Get the KBS frame rust restore kit if too much of your frame isn't gone. If your frame still has strength get that for $100 and stop the rust dead in its tracks for at least 3-4 years. Well worth it. You can also do it without removing the body. Just unbolt the tub one side at a time and lift it off the frame to get where you need to. Be prepared to replace the body mount bolts as well. Check the decried for the KBS. That stuff is awesome.|
|07-03-2012 11:32 PM|
|07-03-2012 08:57 PM|
|Fuddmaster||Buy a welder!! If you have one then fix the frame! I kept mine running good instead of fixing the frame now, the frame is cracked and motor runs alright! Can't drive it tho!|
|07-03-2012 11:10 AM|
|stykthyn||Strippers and blow???|
|07-03-2012 10:22 AM|
Buy a can of rust inhibiting spray paint, some sand paper, and use as much of whats left to fix the worst to easiest safty issues, starting witht eh frame and steering.
Use the sand paper to sand and spray over the sanded rusty areas.
To be frank, your in store for a frame off restoration IMO, before it gets worse or falls apart.
|07-03-2012 10:06 AM|
tune-up and frame rust
can't wheel it if it doesn't run right or breaks in half
|07-02-2012 11:21 PM|
|yjJEEPyj||I'd personally go with Rear corrner gaurds first. They would Hide that rust and offer some more protection. If you went with Smitty built You would have Some cash left over. Maybe use it on some Rust primer and Some Stuff to cut out as much rust as possible before putting on the corrner gaurds. If thats not your thing... Then you can never go wrong with Bumper(s)|
|07-02-2012 11:03 PM|
|07-02-2012 11:00 PM|
|Scooby88||I have a sandblaster you can borrow.|
|07-02-2012 10:15 PM|
|woodsy||a yeah the michigan winters suck!!! ugh i hate rust...i am leaning towards body work and tune up i do believe. Where in MI are you located?|
|07-02-2012 10:11 PM|
|jeep30||Heck yeah, take out that rust man. lol|
|07-02-2012 09:05 PM|
Lets spend $300!!
OK guys and gals,
Heres the thing I am possibly the most indecisive person on the planet, this being said I currently have $300 to buy some parts for my jeep. I can't decide what to you so i thought i would get some input from you guys.
The Jeep 1993 YJ
4inch black diamond susp.
33x12.5x15 cooper stt's
black rock steelies
flex lite efan
decent stainless exhaust (PO installed)
rear body panels (both corners are rotted at bottom)
front flat fender kit (thumb size hole both sides)
front bumper/rear bumper
anything engine related...i should prob do full tuneup...now that i think of it
wind shield frame
frame repair materials
Pretty much anything that can be rusted is, i like the ride height but the jeeps
steering is shotty at best with a new stabilizer. The frame should be addressed rather soon and i just hate the look of rust... Anyway what are you thoughts im bored surfing the net for parts and wifey said its ok to spend 3 bills so lets here some input!
Pics for illustration:
Last pic is me replacing the worst of the frame rot rest is just bugging me