|07-22-2014 10:08 AM|
|07-22-2014 08:26 AM|
A solinoid that has sat for long periods of time failing, is not an uncommon occurance, especially if its been exposed to moisture or a humid environment. The best thing you can do for a solinoid is cycle it every once in a while.
I bought one of the Q9000 winches right when they came out and have been using it since. Mine gets used fairly regularly and hasn't had a single problem. I work on a large ranch so my winch gets used to pull out tractors, stretch fences, load trailers and on the weekends, pull my jeep out when I get stuck. It has saved me from a long walk on a few occasions and hasn't had a single hiccup. I was a little nervous about buying a new and un proven product, but based on my experience, I would have to say that quadratec has a solid winch that I would recommend to anyone.
|07-21-2014 08:01 PM|
|Jou||I bought my the integrated Q 11500IS a year ago and used it three times, listen people !three times! And the Solenoid Module went Bad! I didn't use it in a long while because jeep was storage on the garage during the winter, so its your call people|
|06-26-2014 01:28 PM|
|08-09-2013 07:17 PM|
|1jeeplvr||If Warn doesent get my gaskets they promised to send me over a week ago Im using my Warn for a boat anchor & getting a Q-tec one!|
|08-09-2013 05:19 PM|
|gyramax||I've had the sealed solenoid 9500 Q Tec winch for about 8 months now. Had their side mount solenoid prior but upgraded after an encounter with a guardrail and my front end. Both, I think, are exceptional values for a good product. I'm more of a week end warrior off-roader and the Q Tec has served me very well. And you're right, with their free shipping and price match deals, it's hard to buy from someone else.|
|08-09-2013 02:33 PM|
I have had a warn m8000 for a couple of years now and its been great. Thanks for the rec.Jerry, wish I had been firm with the mechanic on the .456 gears...whats a thousand huh!
I want to plug Quadratec too. I have replaced almost every part on my 01 TJ and as stated paid no shipping. The two returns were on their dime as well and I will continue to buy parts from a company that stands behind their products.
I can't comment on Q's winch but can comment on their willingness to make things right. I couldn't ask for more.....other than maybe start selling warns cheaper than amazon Joe
|08-09-2013 11:05 AM|
|geiman||I understand what holds the rope in place. Tape works fine with synthetic rope, mine is taped and screwed into the side of my warn so I'm familiar with both. It's more of a convenience thing for me. If I was using steel cable, I'd want a secure way to hold the cable to the side of the drum. And again, that has nothing with functionality, just personal preference; it's much more convenient for me.|
|08-09-2013 10:42 AM|
|Jerry Bransford||Mine isn't held down with a screw either, I used a bit of duct tape. Wrappig the rope over the top of itself is what holds it in place.|
|08-09-2013 10:39 AM|
|geiman||Sounded to me like he understood that, he just didn't like that the end of the wire wasn't actually fastened to the drum with a screw. Personally I wouldn't like that either. I'd be curious to see how it is held to the drum at the end.|
|08-09-2013 10:33 AM|
|08-09-2013 10:18 AM|
|08-09-2013 12:25 AM|
Even if this is a dead thread, I thought I'd throw in my $0.02 now that I've had the winch (and used it some)
If you're a hardcore wheeler who uses a winch all the time, don't waste your time with it. Weekend warriors should go with it. The first thing that happened when I installed it, was that I broke the solenoid temp wire connector (not a big deal, just threw on a new connector) Later that day, I went to check the winch line for any damage, and when I got down to the bottom, the wire came flying out of the bottom. Here's my biggest con of the winch; the end of the wire (at the bottom) is not actually screwed into the drum, there's a piece of metal that just holds the loose end down. Not a fan of that. At some point the cotter pin on the hook broke off, which is my fault, but those hooks are months backordered for the correct parts (Quick run to home depot has it solved for now) The line MUST be properly lubed and maintained, even if you aren't using it. I spray WD-40 white lithium on my winch lines to keep out rust and dirt... Never have a dry cable, you're more prone to a break with a dry cable. And last but not least, on my winch, the large braided strands are starting to come apart about 60 feet in. I ordered a Warn cable to perfect any other issues I've had so far.
Now don't let this rant convince you that it's a bad winch, I work in the towing industry and earlier tonight I used it to pull one of our trucks that had rolled over on its side in a swamp.. The truck weighs around 10,000 and I had 2 layers of rope out. Quite impressive.
|07-06-2012 10:49 AM|
Plastidip (spray and dip) has been used in the R/C hobby to water proof stuff like servos, battery packs, circuit boards and receivers for a while. A few coats of the stuff and it seals up all the little openings around screws, end caps etc that could let water in. Spray a few coats over some wire connections for a water tight seal, coat the outside of an MDF speaker box to help protect it from moisture, paint the back of your iPhone or Droid with it to prevent scratches, use it like electrical tape for hard to reach places or very fine wires, works great for masking as well... great stuff. It's the new Duck Tape.
It has so many uses other than making stock rims black.
But it sure looks good on your grill.
|07-06-2012 10:17 AM|
|07-06-2012 10:08 AM|
|07-06-2012 09:36 AM|
|07-06-2012 09:23 AM|
I won't be getting a winch until December or January, but I think I will be getting the Quadratec Q9000.
The "Blemished" one looks like it may be a good deal if one plans on painting it.
|07-06-2012 08:48 AM|
I love America as much as the next guy, but truth be told, we kind of screwed ourselves. And I'm sure that Warn makes a great winch, they are the number one name for a reason... but I just need something to pull me out every now and then, not pull me up a mountain.
|07-06-2012 07:59 AM|
The Quadratec winch looks pretty good. I'd buy one in a heartbeat if I didn't have other things I need worse right now.
|07-06-2012 07:47 AM|
|07-06-2012 07:39 AM|
|07-06-2012 07:38 AM|
|07-06-2012 07:37 AM|
|07-06-2012 06:39 AM|
|07-05-2012 08:28 PM|
|Dragonii||I often wonder how many of the "only buy American made" crowd in these winch threads are typing their post on iPhones made in Chinese sweat factories.|
|07-05-2012 06:30 PM|
Its is a Bulldog winch mount, for TJ's. They have a standard and a heavy duty, I got the standard. I thought I was going to make one, then wanted it hooked up for this weekend so went to an offroad shop in town, they had a Warn and Bulldog to brand to choose from, same exact styling, Warn was thicker by 1/16th of an inch, but 100 more....so the wallet prevailed.
Since I'm posting I've since unspooled and tensioned the wire to the drum. Line speed is a lot faster than i thought it would be. I was at work, hooked to the front of a Peterbilt. Unspooled all 100' feet and pulling up a slight grade (enough that if I were to unwind, the jeep would roll backwards) started pulling and winding the drum. I am a bit of a stickler about this because I used to work on the river, with big winches on barges, and we had to wind the drums tight, no gaps.
Today if i ran the winch for 5 seconds then stopped to fix the wire, when I stopped the jeep would have enough momentum to continue rolling a foot, give or take, before it would want to roll back down hill. Made for a pain in the butt to spool it, loosing tension like that, but line speed was nice.
I'm still happy with it, so far no issues that make me regret buying it. We have a 15 Jeep outing this Sunday, that's when the real word, occasional user review will happen, LOL
|07-05-2012 05:46 PM|
|coolbreeze||Looks good, and thanks for the report. What brand winch mount?|
|07-05-2012 03:46 PM|
|07-05-2012 12:38 PM|
|Cac||Ps if u put the cylinoide in the middle the winch power wire is to short. Don't get me wrong I'm very happy with the q9000 winch quadratec might want to make the power wire. a foot long for the 2012 Jeep wrangler|
|This thread has more than 30 replies. Click here to review the whole thread.|