|03-30-2014 07:41 AM|
Stage 2 would start swapping parts (forged pistons, rods, new cams) to better and stronger pieces
Stage 3 is forced induction, either supercharged or turbocharged, along with more of those better and stronger bits.
You'll also see 1 being cosmetic, then 2 starting performance. But generally, that's what stages are.
|03-30-2014 06:00 AM|
|sfgjsdgjying||Also what was said before, what is a stage 2 or 3?|
|03-30-2014 01:32 AM|
|03-30-2014 12:39 AM|
|95jeepmasacre||when you buy a custom head gasket let me know where you got it. That way I don't have to pay a design and tool up charge. The stock or Felpro or Victor gaskets are only good for 4 Psi boost. I got an assortment of blown gaskets on my wall.|
|03-25-2014 03:09 PM|
|Cowboy Steve||The company I got the build from said to add it for lubrication|
|03-25-2014 01:44 PM|
|Slater451||I thought zinc additives were only needed in engines that were originally designed to run leaded gas. You should need any unless you replaced the hardened valves made to run unleaded with softer ones....|
|03-25-2014 12:14 PM|
|Cowboy Steve||Hey guys I my block is ready for paint. No turbo kit yet. And you guys know of any good zinc additives?|
|09-15-2012 06:34 AM|
|Cowboy Steve||505 performance did the whole setup, I have been doing a lot of research and asking a lot of questions. They sell a reflashing for it, but I am going to get it tuned by a professional, I'm a back yard mechanic, so tuning ain't my thing|
|09-14-2012 06:57 PM|
Post the dyno sheets when you're done...A 300hp 2.5 will be a finicky, hard to tune, unreliable, little buzz bomb.
Good luck with your project but I think you could spend your $$ on a more proven setup if you're looking to get 300hp in a TJ.
|09-14-2012 05:23 AM|
|Cowboy Steve||Ok its been awhile since I've been on the forum, I just need a lil more cash for the stage 3 stroker kit and the turbo kit, it'll have 10psi of boost, and I know it will have around 300hp,|
|07-07-2012 04:10 PM|
|Cowboy Steve||I willing to do it all, i just need a little more time and money for everything that I want to do, I'll keep everyone posted|
|07-05-2012 11:10 PM|
|arizonaTJ||This sounds pretty cool, I would love to know how this goes if you decide to do it!|
|07-05-2012 10:48 AM|
|07-05-2012 09:55 AM|
The only way to get 300 out of something that small is to do a turbo and all aftermarket parts in the shorblock and head. Even then, the 2.5's have a rod problem that will show its nasty head eventually. There are enough ways to make your jeep different without throwing money away honestly.
The other things you have to consider are tuning and cash. Your gonna have more than alot of stroker v8's that make twice that amount of power and have longevity. Are you gonna be able to tune it?
|07-05-2012 08:25 AM|
|Cowboy Steve||I want to make my jeep a one of a kind, well at least not too similar to everyone else's. It will probably be the only 2.5 with 300 or more hp|
|07-05-2012 08:22 AM|
Stage 3 performance and stage 2 meaning different performance parts like rocker arms, pistons, rods, head work, for any part of the powertrain to make it better with more power and more torque, rebuilding the whole motor, making it "worked" there is a stage 3 and 2 stroker kit sold for the 2.5 at
And they do sell a turbo kit for it which I am thinking about buying for the jeep
|07-04-2012 01:18 AM|
Sounds like you will be wasting a lot of money on a 2.5. Unless stage 2 or 3 involves a turbo, and even then it sounds like a waist.
Also what was said before, what is a stage 2 or 3?
|07-04-2012 01:01 AM|
|sporty95f150||what do you mean stage 2 or 3?|
|07-03-2012 09:26 PM|
TJ 2.5L stage 3.... Maybe
I definitely plan on building my Jeep. But I have a dilemma, I want to do stage 2 or 3 to my motor and trans, but I don't want to keep rebuilding it if I build it up with stage 3 performance. So the question is, how often will I be rebuilding the motor and trans if I go stage 3? I won't be beating it every time I drive it, just on occasion when I feel like showing it off.