|03-27-2013 07:52 PM|
|10-10-2012 09:20 AM|
|cavediverjc||^^^^I forgot to add to my last post that I also have a beefy spare tire carrier that mounts to my rear bumper. You can see the post spindle for it on the right side of the rear bumper. I just removed it while doing this mod to keep it out of the way. Plus, it's heavy and I was taking the bumper off and on to get it mounted. In fact, the spare and the carrier are both sitting in my garage at the moment. I won't bother mounting them until I feel the need.|
|10-08-2012 12:37 PM|
|10-08-2012 12:32 PM|
|cavediverjc||The rear hinges are Rugged Ridge Jeep CJ hinges. I got them from Amazon for around $20 or so, shipped. The lower bolts I ran all the way through the body with 2.5" allen bolts. I had to slightly drop the fuel tank to get to the back of the bolts to run the washers/lock washers/nuts on them. The upper bolts I just ran through the tailgate and locked them down with nylock nuts. One thing I'll recommend is that you leave your stock tailgate hinges installed while marking/drilling/installing your CJ hinges so that it doesn't move at all. After you get the CJ hinges installed, you can remove the stock hinges. The latch works just like it did with the hinges on the side. Hope that helps!! Feel free to ask as many questions as you like. I guess I've reached my limit of pictures on this forum since I'm not allowed to upload any more. If anyone has any information on how I can add more pics, let me know. I've been on this forum since 2007 and I've uploaded a bunch of pics. Guess I just ran out of allowable bandwidth...|
|10-08-2012 10:54 AM|
|rbkelley89||Thats sweet where did u get those hinges?|
|10-08-2012 01:30 AM|
|Blueep||I also like your rear bumper - what model is it|
|10-08-2012 01:28 AM|
|Blueep||That's frighten awesome - where did you get the hinges?|
|10-08-2012 12:06 AM|
|summertime||SWEEET im totly book marking this thread. im so doing this once i get mine built.|
|10-07-2012 11:54 PM|
How did you secure the hinges to the tub/tail gate? did you send four bolts thru the tailgate and use bolts? also how did you bolt the hinges to the tub? PIcs if possible?
|10-07-2012 07:15 PM|
|10-07-2012 06:33 PM|
|GoldenSahara00||Anyone do the drop down with a spare still installed on the tailgate? I realy like this and want to do a full truck bed conversion eventually, make a half hard top, and do a front only cage with a tube cage along the inside edge of the tub.|
|08-30-2012 07:43 PM|
|Boobicon||Nope haven't had any problems with it flexing, but i did build my hinge really thick and big.|
|08-27-2012 10:17 PM|
|08-27-2012 10:14 PM|
|08-27-2012 04:52 PM|
|lemonsbw||do you guys have any problems with the right side flexing out at all since there is nothing to hold it in without the hinge there anymore? Nice mod by the way!|
|08-11-2012 03:44 PM|
|08-02-2012 01:58 PM|
|Boobicon||Sorry about the pics sucking.. This may not look spectacular but its Really strong.|
|07-23-2012 07:14 PM|
|Chickasaw420||Did you install the tailgate brackets with self tappers or did you tap and thread the bolts in?|
|07-08-2012 05:42 PM|
Here are some more pics for those interested in doing this mod. It was fairly straight forward. That's not to say it was simple, but it was relatively easy in the grand scheme of Jeep mods.
I had to notch my rear crossmember to fit my bumper flush against it. The hitch is welded front and rear so there is about 1/2" of receiver behind the bumper. That was an easy mod. Here is how that turned out...
I finished fitting and installing my bumper, then I got the fuel tank re-situated and locked down. Here's a pic...
I installed the CJ tailgate brackets I scored used off of eBay. I got them with all the mounting hardware (only some of which I used) along with the tailgate cables for something like $18 to my door. After a trip to the sand blast cabinet at the hangar and an aerosol overhaul, this is how they look...
I attached the other end of the cable inside the tub to the wheelwell with a small washer on the inboard side and a big fender washer on the outboard side to prevent cookie-cutting the sheetmetal. As far as measurements, all I did was get a 2' level and set it up on the tailgate. When I had it where I wanted it, I marked through the cabe eyelet on to the wheelwell and drilled. Easy. I was able to get to the backside of those bolts from underneath the rear of the tub. Here's what the cable mount looks like from the inside...
And the finished product...
I only weigh about 180-185#, so I wasn't able to test it out with any more weight than that, but it held my weight without a whimper, so I'm happy with it.
Follow-up mods (there are ALWAYS follow-up mods) are to Herculine the interior, replace the tailgate striker, and install new tailgate weatherstripping. There is a Herculiner kit, a striker, and a tailgate weathstrip in my garage just waiting to be installed...but it'll probably have to wait for a couple weeks.
I also want to touch up the missing paint where my YJ gate hinges used to reside.
I hope this post has helped some of you contemplating this mod. It's an easy mod, but make sure you've got your parts lined up prior to tearing your Jeep apart. Remember, you'll have to drop your fuel tank to get to the backside of those hinge bolts on the bottom.
|07-07-2012 06:35 AM|
|CJ-John||Looks good so far!|
|07-06-2012 10:08 PM|
I started my drop down gate conversion last week. It's been ridiculously hot here, so I work on the Jeep only about an hour at a time. Here are a couple pics. The hinges are new CJ gate hinges that I painted to (somewhat) match the color of the Jeep. I installed the CJ hinges prior to removing the YJ hinges so the gate wouldn't move. It works great. Now I need to install the CJ cables and brackets I got off eBay so the gate can support weight instead of just flopping straight down. Excuse the gas tank...I had to move it out of the way to install my rear shackles and to get underneath the body to install those CJ hinges. It was a pain in the bum, but it worked and they're SOLID. Now all I need to do besides the bracket/cable installation is re-install the fuel tank and rear bumper/tire carrier. I'll take more pics as I continue.
|07-04-2012 03:04 PM|
|07-03-2012 11:25 AM|
Swag off road makes a kit for this. It comes with hinges, cables, mounting brackets for them for tub and gate, and 2 small brackets with the nuts welded to them and a piece of round metal for fishing through the holes behind the spot you marked A.
I have a CJ tailgate and the kit from them minus the CJ hinges as they came with my tailgate. I have not had the time to do the conversion yet as this gate has the little metal tabs to hold it closed from the inside and I need to make brackets for them.
Yes CJ tailgate will work. You can do a search on here for guys who have done them.
|07-03-2012 10:52 AM|
|07-03-2012 07:06 AM|
|CJ-John||I've never checked it out but wouldn't CJ hinges be the way to go? How about a complete CJ tailgate?|
|07-02-2012 10:25 PM|
|GoldenSahara00||I know, people keep telling me that, I forget the body on frame flexion. You can probably do nutserts on the bottom piece of the body easy enough. Jeep tubes has a nice hinge kit, so does A to Z I think , and several other places.|
|07-02-2012 06:33 PM|
|bobjenkins||Well I made a hinge, not really too happy with it (I cut it from a piece of sheet metal , 3inch flat bar wouldve made it way nicer and easier, I might just buy some hinges|
|07-02-2012 04:12 PM|
One thing I would say tho is that I would avoid having a connection straight from the frame to the tailgate/bodytub because they have to move independently (I had thought I would just weld my hinge on the frame instead of that painted area marked A in the pic above but then realized they are going to be moving and might just rip the hinge up
Ill post some pictures of what I come up with this week
I like your idea of the tire carrier that just flips down too if you make it Id like to see it so I can copy it haha
|07-02-2012 02:23 PM|
Bob, I was thinking on this the other night, and this is what I came up with doing when the time comes. I am going to attach the hinge to a piece of steel that will mount to the frame or bumper, which ever. the other side of the hinge will be welded to a 3/16th steel plate that I will cut and modify to accept bolts similar to the patter on the rear of the tailgate now where the stock tire carrier bolts in. Pretty simple, and only some light welding and drilling required. Add in some straps to keep it from lowering past 90* and your set. For the spare tire I was going to add two more hinges to the same piece of steel by the bumper that attach to the frame, and use a stinger type tube and use that as a "basket" to hold the spare in. mounting plate optional. They would hinge independantly just because its easy to set that up. The tire will be positioned so that it drops dow and just misses the bumper, and the tailgate will fold down on top of that. Or you could still use a traditional swing out carrier.
I am thinking materials about 150 total including the hinges and steel, shouldn't be too bad, just have to have a weekend to mock everything up and prep and put it together.
|07-02-2012 11:38 AM|
Im probably going to put spare on roof, or in the back until I build a tire carrier. Or maybe in the garage, except I know ill have a blowout the day I put it in the garage lol
|This thread has more than 30 replies. Click here to review the whole thread.|