|08-18-2008 07:27 AM|
|08-17-2008 12:55 AM|
|MoA||2'' bb and tube fenders =D thats all the rubi needs|
|08-17-2008 12:51 AM|
|Reclaimer||yeah, cheap and dirty isin't always the best way to go. i've never heard a story of a cheap lift end well.|
|08-17-2008 12:26 AM|
|08-15-2008 11:58 AM|
I picked the middle of the road...RE 4" Superflex Suspension lift + monotube shocks. Saved some cash and re-used the original rims (15x8) put 33" x 10.5 TSL's.
Great kit and you do not need to donate a kidney.
|08-15-2008 10:57 AM|
|GrnTJ||I agree 2" bb and 1" bl is a good way to clear 33's for mild wheeling until you can get a full kit. If he doesnt want to mess around or he has the $$ right now he might as well get long arms because thats what we all strive for in the end, lol.|
|08-15-2008 10:42 AM|
|98TJSahara||I agree with all imput, however I've been running the RE 2" BB with 33 x 12.5's for almost two years now. It is a temp. thing til i can get more $$ for the RE 4.5 long arm. But it looks great, i get a lot of looks and compliments. Plus the install was cake. I have now installed the 1 "BL. So 2" + 1" and 33's is far from stock, decent clearance, good daily driver and not too expenisve. ($300+) w/o tires|
|08-15-2008 09:40 AM|
2" Budget boost and body lift.
Since it is a Rubicon, it will not need the MML because it has the CV driveshaft in the rear.
|08-15-2008 09:29 AM|
Iím new to this thread thing.
Iím trying to do the same with my 04 X what would be a good lift?
Iím looking to do a bit more aggressive wheeling and my 31s arenít giving me clearance Iím looking for.
|08-15-2008 09:07 AM|
|GrnTJ||Better way=RE 4.5" long arm kit|
|08-15-2008 07:52 AM|
Cheap things are seldom good, and Good Things are seldom cheap.
Tell him to save up for a complete lift kit.
But if he has to have it now, the 2" spacer and body lift would work.
|08-15-2008 06:46 AM|
|richp||The better way is with a real lift kit, if he wants inches now go for what you want up front, don't try to sneak up on it, sneaking up on it gets more expensive in the long run.|
|08-15-2008 01:25 AM|
Guy at work
Dude has a stock '04 Rubicon, original owner, no mods. He asked me the cheapest way to get 33's underneath it. I told him a 2" BB and a 1.25 BL, with a 1"mml, and new wheels, or spacers. you got a better way?