|10-10-2006 12:31 PM|
|scumby||when putting my new exhaust in i found the same thing. what i did to fix it was loosen the pipe that comes off the exhaust manifold and rotate it until the cc doesn't touch the skid plate anymore. worked for me.|
|10-10-2006 10:10 AM|
|DownandDirty||It won't hurt the skid plate per say but eventually it will start rattling and, at some point, rub a hole in your cc. I would fix it correctly now.|
|10-09-2006 10:07 PM|
C Converter resting on skid plate. OK?
Hello, I just replaced my muffler on my 94. Now my catalytic converter is resting on the skid plate because the fit is not as tight as it once was. I will place another hanger in between the CC and muffler, so this should solve the problem long term, but was wondering if you guys have ever had a similar problem? Or if it even is a problem?
After driving around I checked the tempature of the CC and skid plate and while it was hot,it was not as hot as the muffler and did not seem hot enough to melt anything....