|07-15-2012 09:43 PM|
|boxingfreddy||Have you noticed any handling changes on the pavement?|
|07-14-2012 09:30 AM|
|RB-10rubicon||I have them on mine for a year now and have them checked everytime i rotate my tires (every 5k) im running spidertrax .no problems what so ever|
|07-14-2012 09:20 AM|
I'm not saying spacers will fail, but they are something else to break. If I were you, I'd just get new wheels with an offset built into them...
|07-14-2012 09:15 AM|
|AdrianVall||I have spidertrax 1.5" spacers. No issues yet! *knock on wood*|
|07-14-2012 06:17 AM|
|ESP||Ahh yes i remmember those bricks|
|07-14-2012 01:35 AM|
I ran them for a little over a year before getting new wheels. No issues at all with ball joints
Since I bought my 285/70/17's before I got my spacers I have a good before and after pics with the same tire/wheel combo to see the difference in stance
Before with stock wheels and GY MT/R w kevlar 285/70/17 tires
After with same tires/wheels with 1.5" Spacers
|07-14-2012 12:03 AM|
I've had mine for a couple of months now. I have checked them twice and have not seen any loss of the original 90lb torque setting.
Here is a pic after Spidertrax 1.5" spacer install.
|07-13-2012 05:43 PM|
Spacers are ok when maintained. Use the loctite and retorque them every so often, usually during tire rotation is a good rule. Also don’t cheap out on them, they’re not all the same, their tensile strengths are different. I suggest Spidertrax in the 1.5” variety. Tons of people run them. I actually have never heard of a spacer failing. I run Synergy 1.75” spacers.
As for ball joint wear, I have had 35’s on for 10K miles or so and spacers for about 5K, no need for ball joints yet. All Jeeps are different, so YMMV
|07-13-2012 04:20 PM|
Afternoon, all. I would like to get a more aggressive stance from the stock JK wheels. I'm planning to put some BF A/T's on soon, but I don't really want to mess with a lift right now to "beef it up". So, I'm thinking about 1.5" spacers to widen it a bit. Is anyone running with spacers? I searched thru the forum and didn't find what I was looking for, specifically: how much more wear can I expect on the ball-joints, and is there really a problem of the spacers coming loose at some point if I don't use Loctite and put at least 90 lbs. or torque on them? Any pros/cons I should consider? Thanks...