|08-28-2008 11:44 PM|
With a D44 your pretty much set for tires up to 35"... and Dana35 with a Super kit is still a risk(others might say differently). But I'm gentle on my rig so I don't see any axle breaking in the near future.
|08-28-2008 11:26 PM|
Now that is right up my alley...
With a D44 or a Super 35 I whould be pretty good for awhile.
All the RE kits can be upgraded to the LA kits eventually right?
|08-28-2008 11:18 PM|
That's the one that comes with 35" tires and wheels as well.
I got this one: Rubicon Express RE7000 4.5 Super-Flex Kit & SYE Combo
I got the RE Twin-TUbe shows, but I'd stay away from them. A little on the rough side. And at the begining of Feb or something, Rubicon Express has raised their prices some.
I bought my tires and wheels at a place in Mesa.
|08-28-2008 11:06 PM|
4.5" Rubicon Express Ultimate Superflex Kit for TJ /LJ Wrangler
|08-28-2008 10:24 PM|
|08-28-2008 09:45 PM|
|08-28-2008 09:41 PM|
|08-28-2008 09:21 PM|
|cavediverjc||Make sure the gears are the same as the front diff and take out your D35 and direct swap the D44. Simple. Can be done in no time if you have the right tools.|
|08-28-2008 09:17 PM|
What would I have to do to put that in?
|08-28-2008 08:48 PM|
|AzTJ||Anything larger than stock will bog down without gears, its not the overall size but the added weight.|
|08-28-2008 08:30 PM|
|08-28-2008 08:08 PM|
|08-28-2008 08:07 PM|
|08-28-2008 08:03 PM|
|08-28-2008 08:00 PM|
|4Jeepn||Okay, If its your daily driver ditch the detriot and get either an ARB or Ox Locker back there. Also price it out and see how much a used TJ dana 44 will set you back. yes the super 35 is nice and will be fine wiht 33 and locker, but a 44 is much nicer.|
|08-28-2008 07:53 PM|
SYE = Slip yoke eliminator.
This will make the rear of the transfer case a fixed yoke and put the slip/slide in the driveshaft.
I got my Rubicon Express kit from 4x4groupbuy.com - I got the 4.5" kit actually with 3.5" spring because I wanted the upper adjustable arms for the front and rear. I think I paid ~$1400 for the kit, sye & driveshaft. The SYE and driveshaft came as a combo with the kit. Got it all done in one shot.
|08-28-2008 07:50 PM|
|Jerry Bransford||The only change I strongly suggest is going with 15x8 wheels for those 32x12.50 tires instead of the 15x10 wheels. 15x10 is ok for street use but 15x8 will work better offroad as well as still working fine on the street. The narrower width of a 15x8 wheel means the tire won't have to work as hard to stay seated when aired down for offroading.|
|08-28-2008 07:41 PM|
32's will be fine if I dont' need to regear.
SYE kit (no idea what that is), driveshaft, and rear upper adjustable arms...what brand?
I'm still VERY new to off roading.
I forgot to mention also that the Jeep has a cheap 2in Procomp lift on it now, from previous owner.
|08-28-2008 07:36 PM|
What motor tranny do you have? I see you are wanting the Super35 kit... are you dead set on 33" tires?
I'm running a RE 3.5" lift with 32" tires and really don't see much of a reason for 33's. 33" tires will also really bog you down without a re-gear.
I'd also recommend a SYE kit and new driveshaft so you don't have to lower the skidplate and lose the ground clearance you just spent so much money for. Rear upper adjustable arms are a good idea too.
|08-28-2008 07:25 PM|
Before I order...Please comment
I plan on starting my build on my 99 stocker here in the next couple of weeks. What should I go with first, last etc?
Mickey Thompson Baja MTZ 33 12.5 15, all 5 (Are these a good choice?)
15x10.5 black steel rims, all 5 (I hate fancy rims)
RE 3.5" Super Flex Lift Kit (What shocks brand/size should I get?)
Super 35 axel kit with Detroit Locker (Should I change my gears? to what?)
A buddy is a welder and has a pipe bender so he is custom fabing front/rear bumpers and sliders for me. He did it to his 99 Toyota PU, full inner cage, open bed frame etc. Should I spend the money on what I want or have him fab what I want?
With all that what else would I need so I don't "break" anything on the trails?
All in alll I want to spend no more than $3-3.5k but still have a quality build. Any other ideas?