|09-04-2008 07:27 AM|
|09-04-2008 03:35 AM|
|JeepCommandoja||you need to remove the backseat permanentally that would make it look better and get some round bars and weld those on there instead of that square one.|
|09-04-2008 01:03 AM|
|09-03-2008 10:45 PM|
|09-03-2008 07:50 PM|
|09-03-2008 07:43 PM|
|09-03-2008 07:40 PM|
|silvergoat||Can't we all just get along?|
|09-03-2008 05:05 PM|
|09-03-2008 02:21 PM|
BTW, the bottoms of the bars are welded onto 3/8" plate steel and bolted on at the factory rear hoop bolt holes.
|09-03-2008 08:44 AM|
|09-03-2008 07:55 AM|
You're not a welder are you? If the weld is "usually a weak link" then you need a new welder. As in, the person welding and not the machine.
|09-03-2008 04:33 AM|
|yjwrangler||DOM tubing!!! come on everyone, its not that expensive, a weld is usually a week link so stacking them kinda seems like trouble (not bashing your cage, your individualism makes your jeep that much better). i'd cut it out and put in some tubing a little lower on the upper hoop, like on a yj or cj cage, right on the upper bend. thats just me. you gotta notch the tubing, cope it i mean.|
|09-02-2008 09:35 PM|
I'm not trying to bust your chops here as I'm more concerned than anything but...what you're telling me just doesn't sound all that safe. I'm certainly not a welder but it has been my understanding that welding on top of another weld (the washers) only weakens the weld. Yes? No? Also, how is the rear of the cage attached to the tub?
|09-02-2008 08:43 PM|
i pray i will never need it, but i also have a cj2a without a rollbar and have yet to put it on its top
|09-02-2008 08:23 PM|
|JeepersdoitDeeper||I fir ine would have gone with round in a matching diameter. I would like to see a closer pic to see how it is attached for function and safety. What metal did you use? What size?|
|09-02-2008 07:49 PM|
|Scout||How is it tied into the main hoop and the tub? Also, I have to agree with the above posts. It may look really good, which it does, I just have to wonder just how functional it will be when you actually need it.|
|09-02-2008 07:44 PM|
|4Jeepn||Not crazy about the square tube, would have liked it more if it was matched to the center hoop, like the CJ. But its your jeep as long as you are happy then its fine.|
|09-02-2008 07:06 PM|
IMO it look sgood, bit it seems to be too thin material to protect you when you roll over. and the passengers on the rear seat aren´t protected.
if you install a lift and bigger tires in the future you could get rid of the rear seat and install a full size spare tire on a cross member on the new rear roll bar. or you could install the radiator there to protect it against mud and water.
|09-02-2008 06:50 PM|
|Warpman89||how does the rollbar look? i like the cj style better than tj style|
|09-02-2008 06:44 PM|
I hope this works. Im new to photobucket.
If it does, here are some poser pics and my remodeled rollbar