|08-23-2012 02:06 PM|
|The Heat||Thanks, and I will try to figure out how to troubleshoot it and take tranni off and take a peek. Not sure what I would honestly look at or know whats wrong.|
|07-21-2012 09:33 PM|
|07-21-2012 01:01 PM|
|Jerry Bransford||Why do you think you need a new flywheel? The TJ rarely needs its flywheel replaced when replacing the clutch.|
|07-21-2012 02:05 AM|
How nice to see I get to pay $270 plus $65 for my clutch and flywheel.
WTF is the clutch so much?
|07-21-2012 02:01 AM|
|jefferyc22||AMS Automotive 167002 - AMS Engine Flywheel for 91-04 Jeep® Wrangler YJ, TJ & TJ Unlimited with 4.0L 6-Cylinder - Quadratec|
|07-21-2012 12:30 AM|
I dunno about the 2.4L engine equipped TJ but the factory specifically warns against resurfacing the flywheel for TJs with the 4.0L and 2.5L engines. The flywheel has a crown on it to smooth clutch engagement which would be removed if it were resurfaced. At the most, the factory says to lightly hand sand the surface of the flywheel with emory cloth or a mild grade of sandpaper if any glazing is present but that's it.
The 2.4L may be different but I kind of doubt it.
|07-21-2012 12:11 AM|
You can do it!
Replace all the parts.
Have the flywheel resurfaced.
Do it right do it once.
|07-20-2012 11:40 PM|
My 2005 2.4L clutch starting to slip on 1st and hard putting in reverse. Soooo im guessing i may need a new clutch. Would like to do myself but not sure