|07-21-2012 10:07 PM|
|GoldenSahara00||They are all expensive of you ask me, and ecgs is about as American as you can get, unless I missed something.|
|07-21-2012 08:29 PM|
|Lineman827||just checked em out, price is fairly close. i was also lookin at superior axel.. AMERICAN MADE!! a lil more expensive, (locked) but i do like supporting AMERICAN businesses|
|07-21-2012 08:24 PM|
|GoldenSahara00||Good advice and you can get a loaded up 8.8 for about the same price as an unlocked 44 from g2/quad if I remember correctly.|
|07-21-2012 06:49 PM|
|07-21-2012 05:46 PM|
|07-21-2012 05:31 PM|
|07-20-2012 11:33 PM|
|GoldenSahara00||You should stick to 35s and building your hp30. Not worth the work to compromise for a crappy d44.|
|07-20-2012 10:40 PM|
As far as strength, they'll be much stronger than the D30. Leaf spring perches that'll have to be removed and spring cup will need to be welded on.
They'll have 6 lug rotors, disc brakes and will fit 15" wheels.
|07-20-2012 08:23 PM|
|07-20-2012 08:18 PM|
|TJe0454||turns out its a passenger side drop well what years are good to pull a d44 front from? something with a close width to the d30....|
|07-20-2012 02:43 PM|
Tom I find it funny that I suggested a hp44 to you a few weeks ago when you mentioned going to 35s, and you told me it was a bad idea.
You'll have a sweet axle setup when you finally do pick a front axle.
|07-20-2012 02:06 PM|
|Ibuildembig||Yup, didnt think about that.....dont see too many of them around here in the last 20 years LOL|
|07-20-2012 02:01 PM|
|07-20-2012 01:58 PM|
|Ibuildembig||Well, if it is indeed a Ford with leaf springs, then there is only one it could be and that's out of a supercab 74-79 and would not have cast wedges (that's 78-79 only, and only 1/2 ton regular cab). This is the reason we need pics I am all for 60 fronts, just most people dont want to open their checkbook up that far|
|07-20-2012 01:48 PM|
|07-20-2012 01:34 PM|
|Ibuildembig||But being high pinion will be strength point, and full width is alot more stable|
|07-20-2012 12:40 PM|
The swap isn't really worth doing . There is only one vehicle that came with a hub that would work on that axle that would get you a 5x4.5 bolt pattern . Some d100 pickups had those hubs and they were super weak and unreliable .
The ford 44 is 67.5" wms to wms . A tj is 60.5" wms to wms .
Also the most common failure points on a Dana 30 and Dana 44 are the same . The universal is generally the first thing to fail on both these axles and they both use the same size universal joint . Another point of failure is the ball joints and they are also of the same small variety , so again no real strength gains.
|07-20-2012 11:48 AM|
|07-20-2012 11:43 AM|
|Ibuildembig||Well the years do matter, but Ford didnt use a Dana 44 after 1979. Get some pics and we can tell you what it is|
|07-20-2012 11:39 AM|
so let's say, for the moment, that its a ford d44. i know the year matters but i dont have the info right now.
|07-20-2012 11:36 AM|
|Ibuildembig||Hmmmm, chevy never made any solid axle that was drivers drop diff.....maybe he is cornfused and its a ford?|
|07-20-2012 11:34 AM|
6 bolt chevy dana 44 front swap into TJ
hey all, came upon a cheap d44 front my girlfriend's brother has sitting around. all i know is that he wants to get rid of it, its a 6 bolt chevy d44, driver side diff, and currently set up for leaf springs. he would be doing the welding and mount work (hes works for a fabrication shop). anyone have experience with this? is it as easy as getting 5x4.5 hubs with matching spline count and welding on control arm/track bar mounts?
now that i have an 8.8 in the rear, i felt that a d30 would be my weak link. im planning on throwing the d44 up front, c gussets, and shafts all around to run 37s.