|07-23-2012 08:45 AM|
|BIGLIFTER76||ok thanks ill give that a try|
|07-22-2012 07:53 PM|
|Cj7otr||Yup. Only try dropping the belly pan when the entire drivetrain is together.|
|07-22-2012 07:52 PM|
|07-22-2012 10:52 AM|
|4Jeepn||Remove the t-case drop until after the install of the engine, then drop it and see if that works.|
|07-22-2012 09:39 AM|
cj5 lift problems
I bought a BDS 4 in lift for my 76 cj5 and I put the transfer case drop kit on, when i went to put the engine and tranny in, the tranny would not line up with the holes, like the pan was sitting to low.
Has anyone had this problem and what did u do about it?