|10-03-2013 05:32 PM|
|jeep4x4maniac||Sweet lookin lj man it looks mean. And workin hard for your stuff, you deserve it!|
|09-26-2013 11:35 PM|
|kylekae||So I think I'm gonna get a 50" led bar. I know I can get one cheap for $300 combo beam. I don't want to wast 200 on a mount. What do you guys think about mounting it straight thru the windshield frame. I can put two bolts through the top near the glass and I'll have access the nuts. And it should look clean. Options?|
|09-12-2013 11:41 AM|
The cut was easy just download the template form metal cloak and cut with a jigsaw. But heavy metal blades that work great. Only used one blade. When I cut my rivets out for the stock rockers I didn't cut enough of the rivet and then just pounded them out. Which causes little dimpled around all the rivet holes so I have a gap. Not to bad though.
|09-12-2013 02:00 AM|
Thanks I appreciate it!
|09-11-2013 09:44 AM|
|kylekae||Yea ill get them up later roday|
|09-11-2013 03:38 AM|
Do you have any more pictures of the rockers? I have MC Fronts and would like to see how you fit them because I like those a LOT but have hesitated because of the lack of anyone running them that I've seen.
|09-11-2013 01:55 AM|
|Nissantech||Man sweet looking jeep that bumper looks mean!|
|09-11-2013 12:38 AM|
|gsellars||i was there. i saw you on the obsticles|
|09-09-2013 10:28 AM|
Went to jeep fest in jasper ga this weekend and won $100 bucks for being the 1st to balance on the teeter toter.
Also drove up a huge dirt wall and flexed on a guard rail
|09-01-2013 08:01 PM|
Got them on. They were a pain to install with the body mounts and the 1 inch bl but it was defiantly worth it.
|08-31-2013 12:17 AM|
|08-29-2013 10:56 PM|
|08-29-2013 11:07 AM|
|fourty4magjr||Haha that's awesome man! I didn't purposely copy you but I have a bumper similar to yours (had it for 4 or so months now) that I had a guy make since they don't sell that one anymore and I have the metalcloak arched fenders on the way with the 6" flairs. Im in the middle of my savvy/ currie lift and 8.8 instal, super excited to see it complete now that I've seen how yours has turned out I know mine will look jut as bad.ss|
|08-29-2013 09:01 AM|
|kylekae||Last week I almost rolled. I reversed back to try a new line and as you see my front tire came up and I teeter tottered back an forth but she saved herself. Pretty scary stuff ill try to upload the video link later|
|08-29-2013 08:58 AM|
|08-29-2013 08:57 AM|
|08-28-2013 01:59 AM|
|08-27-2013 09:19 PM|
|08-27-2013 09:01 PM|
|kylekae||So have some updates I ordered poison spyder ricochet rockers and should get them friday. will post some pics when i get them installed|
|06-14-2013 04:02 PM|
|kylekae||Yes they are 15x8 on 6 inch flares. They don't stick out at all past flare|
|06-14-2013 12:09 PM|
|06-14-2013 11:54 AM|
They are 15's and I think the backspacing is 4. The front bumper is a shrockworks po rock hammer but they do t make them anymore.
I'm saving up now for rcvs, tummy tuck and rockers. I may be able to get 1 of those by summers end because well that like 3k for all of that so, back to work haha
|06-13-2013 06:24 PM|
|NJO||I can see doing RCV's in the front.........they have a few nice benefits, especially if running a locker. Not sure if doing chromo shafts in the back yet though are necessary. Id actually put that money towards some MC sliders first or do a TT before I would worry about rear chromo's.|
|06-13-2013 06:23 PM|
|Robert C.||What front bumper is that|
|06-13-2013 06:19 PM|
|NJO||What size rims do you run? WHats the BSing on them?|
|06-13-2013 05:46 PM|
|06-12-2013 10:36 PM|
Well today is the day! I ordered my 35's. I stuck with km2's because they work well. So now all I need is rcvs and rear chromolys. At Durham town 2 weeks ago u really beat my stock transfer case skid so I now want a tummy tuck really bad. Ill post my 35's when I get it. Here's some more pics of my recent trip. Also got spiderweb shade. It's totally worth the $100.
|05-13-2013 07:24 PM|
|kylekae||So I've been dealing with a lot of mud and its starting to show. My front driveshaft is being rebuilt now, had 2 bad u joints and a bad centering ball. My g2 cover on the front contacted my track bar at flex so I went an alternative route and got the ballistic fab recessed cover. It works good but it took 3 covers to get one to fit. So good product but bad first 2 and good service. Plan on getting 35s and rcvs by the. End if summer|
|04-27-2013 10:56 PM|
Go the savvy gas tank skid and it works great. Here it is representing
|03-12-2013 10:55 PM|
Got my savvy gas tank skid. Will post some pics when I get it on this Fri. Also got the Jeep on the lift this week and looked at where I scraped a couple time at Durham town o. My engine skid. Anyway I hit a bottom head screw for the ucf engine skid and so that was shot. Luckily the nut was pushed in so far that all I had to do was take of the back nut and the bold stayed in place. So i will be countersinking the skid where it meets the transfer case skid. But when I pulled the engine skid. I saw that I bent my stock transfer skid where I trashed the bolt. I guess that means a tummy tuck this summer. Haha here's more pics.
|This thread has more than 30 replies. Click here to review the whole thread.|