|08-09-2012 05:48 PM|
|AirWerkz||The VIAIR compressors pretty well sealed up, but just make sure to remote mount the intake filter to a dry place. The compressors come with the hardware and air line to do so.|
|08-06-2012 04:05 PM|
|Sccafire||I have a complete Kilby system set-up in my Jeep.|
|08-06-2012 02:33 PM|
|denisbaldwin||I'm considering getting the VIAIR system (the constant duty one) but I'm concerned about leaving it out in the elements as it will have no protection against weather. Any one have any issues with them rusting? not performing after getting rained on?|
|07-28-2012 06:20 PM|
Here's a recent thread on the topic. I suggest you read it all, but my setup is illustrated at post #42.
|07-28-2012 06:11 PM|
|SandDevil||anybody else have a setup they wish to share?|
|07-28-2012 04:27 PM|
|SandDevil||Nice. I like where you have it mounted too bad my air intake is in the way|
|07-28-2012 03:45 PM|
Airing up is fine. But I've never felt a need to run air tools, but it will do it. I carry an electric impact instead - but rarely use it. On long hrd trails where I expect someone will break something that needs welding, I also carry a 4.5 electric grinder and an inverter.
Here's my Sanden on my Rubi, the same type compressor Jeep uses for ac. I did not touch my ac compressor - I like the ac.
I made my own mounts from 1/2" angle, and it's driven by a short serp belt from a dual pulley on the alternator. Kilby has the pulleys.
|07-28-2012 03:34 PM|
|07-28-2012 01:41 PM|
|07-28-2012 01:25 PM|
on board air compressor
I've heard a lot of talk about people having on board air compressors on their Jeeps for airing down/up and for running air tools. I'm interested in having this for my rig as well and i was just curious as to what type of compressor you have on board and where do you have it mounted/stored? Pics are appreciated.