|08-08-2012 08:05 AM|
|08-07-2012 04:52 PM|
|08-07-2012 04:51 PM|
|98 tj sport||No problem I was in the same boat till I saw it and saw it is almost the same as the currie and cost like half as much|
|08-07-2012 04:48 PM|
|Skol-Vikes||Some good info there on the swap. I was looking at some other options that were double that price. I don't know this option was out there until today. Thanks!|
|08-07-2012 03:52 PM|
|98 tj sport||
Well I'm on mobile so it won't let me post a link but search for this
ZJ Tie rod swap
That's the title of the thread and it has all the info u need as well as a link with pictures
|08-07-2012 03:50 PM|
|98 tj sport||Like unlimited said go to ur local auto parts store and get a zj tie rod and end which replaces the stock one with a much beefier end and rod plus the zj rod is solid were as the tj one is hollow if I'm not mistaken this is going to be one of my next mods there is a link floating around here some were with more info but it bolts right up from what I have read|
|08-07-2012 02:59 PM|
|fmftj||Thak you very much guys, i appreciate it.|
|08-07-2012 02:22 PM|
|Imped||Then you need to follow unlimited's advice to a T. There are very lengthy discussions on other forums about this subject. Check them out and you'll learn that successfully implementing a crossover/WJ setup requires much more than the ability to weld.|
|08-07-2012 01:32 PM|
|fmftj||My budget would be around 400, as in capability, i cant weld and have no air tools. as of no how im decent, far from mechanic but i did my lift my self so thats about it. and i really didnt know there were types and geometry to a 1 ton, i pretty much thought that was just beefier hardware.|
|08-07-2012 01:28 PM|
there is only two steering systems to consider. the V8 ZJ tie-rod upgrade or Currie. if you don't want the Currie, then get a V8 ZJ tie-rod from NAPA.
inverted-T is a waste of time.
OTK is over the knuckle. to do this steering right you're looking at major modifications, which sometimes include lots of fabrication, notching the frame and knuckle swaps.
and what do you mean 1-ton? what kind? what brand? what geometry?
|08-07-2012 01:28 PM|
What's your budget and what's your level of capability?
Regardless of the answers to the above questions, considering the downgrade to any variation of the inverted T flavor is a poor idea.
|08-07-2012 01:17 PM|
steering system upgrades?
Alright guys so its time to start looking at upgrading my stock steering system to something better I.E. strength and handling. Right now i have a 3.25" RC lift. I know everyone states CURRIE is hands down the best but id like to hear what other people think. Either inverted T, 1 ton, OTK. i just like to hear who has had experience in this and hear what they like most or what they didnt like. thanks for you time guys.