|08-11-2012 08:45 AM|
|jgorm||My guess is that the PO used a tow bar in reverse so that the bar would stay attached to the jeep instead of the motorhome. In theory it would work if you had a strong attachment for the tow bar on the motorhome bumper, but my motorhome bumper is fiberglass and the hitch is WAY stronger. I wouldn't consider running it backwards.|
|08-10-2012 06:35 PM|
|Redrider94||I would not, your tow bar needs to be attached at two (2) points on your jeep to track proper with the tow vehicle and to provide a safe hook up between the two vehicles. The PO may have used the receiver that's on there now for a winch or to spot a trailer. Be safe and tow it correct, not real sure your insurance would pay a claim with out having the proper tow equipment in case something were to happen!!|
|08-10-2012 05:29 PM|
|08-09-2012 04:13 PM|
It looks like your jeep was set up to pull something backwards....like launching a boat or pulling it out of the water.
There are lots of great towbars systems to choose from.
|08-09-2012 01:45 PM|
|08-09-2012 01:23 PM|
|Peepers||As it is, I would say no. Our tow bar uses the reciever of the motor home and has two connection points about frame with apart on the jeep. You just have a reciever hitch in the front.|
|08-09-2012 01:16 PM|
|Dextreme||Here is my Flat Towing thread that might give you some ideas: http://www.wranglerforum.com/f5/sett...ow-136535.html|
|08-09-2012 01:11 PM|
Flat Pull Behind - Hitch Help
I just bought this Jeep and was told that the prior owner had flat towed it. It was a screamin' deal because I bartered it down pretty far so I didn't focus too much on the front bumper configuration. However, one of the key reasons I bought this is to pull behind my class-c RV.
Can some of you that have set up your Jeep for towing please look at the picture and let me know if I can use the current configuration to pull this behind my RV? I'd appreciate any information that you can share.