|09-15-2012 11:29 PM|
|09-15-2012 11:39 AM|
|terpsmandan||I bought the Kicker sub already installed in a factory enclosure ready for plug in. It sounded better than the Goldwood that I used to replace the OEM sub. After hooking the amp to it and adjusting the settings on the amp and the HU, I decided to hook the sub back up to the OEM amp, luckily I forgot that I clipped the remote line off of the harness to turn the amp on. With the OEM amp not working, I reconnected the new amp to the speaker and finished filling up the enclosure with polyfil and that made a huge difference in the sound quality. I already had filled the overhead pods so I had some extra.|
|09-13-2012 07:36 AM|
Pyle PLPW6D 6.5" 600 Watt Dual Voice Coil 4 Ohm Subwoofer
I got this from amazon, I think around $30.00. Sounds pretty good. I had to trim bottom ribs of box a bit to get it to fit. I think I should try the polyfil, does it make a big difference?
|09-13-2012 12:19 AM|
|loft||And for the record, I have a Bazooka 6.5" DVC sub on the way. Going to see if I can make it fit in the center console, it is a bit deeper than the Kicker CVT sub.|
|09-13-2012 12:01 AM|
|loft||Yes polyfill is a must! Use it in your sound bar as well if you replace those speakers and it will make a difference|
|09-11-2012 03:58 PM|
|terpsmandan||Seems that it needed to be filled with polyfil. Sounds really good now.|
|09-06-2012 06:44 PM|
|terpsmandan||All hooked up and I have it under the back seat for now. Still trying to figure out how to set it up for the best sound.|
|08-29-2012 05:02 PM|
|terpsmandan||Grabbing a DX250.1 on Friday.|
|08-21-2012 05:39 PM|
|terpsmandan||Thanks for the pix.|
|08-18-2012 10:16 PM|
I cut a piece of metal in the shape of the amp (traced it). I had to trim some of the plastic on the amp and trim some more off the plate.
Drilled .5" slot 2.25" from the end and centered for the mounting bolt.
Put a bolt thru the slot and finger tighten a nut.
Mount amp to plate and slide in to place.
The mounting bolt will go thru a hole in the steering column mounting bracket. Put on a nut and you're done. Finger tight is all I did. It's a tight fit so the amp won't be going anywhere
Once you cut the plate out, put in place and my horrible instructions will make more sense. Here a few more pics that may help you. The 250 appears to be the same size as the 500 so you shouldn't have any problem with space. It's nothing great but it cost me $0 and I lke free stuff.
|08-11-2012 01:53 PM|
|08-11-2012 12:23 PM|
|terpsmandan||Looks like the mice got it.|
|08-10-2012 04:21 PM|
|loft||Oh man... lol. I'm still running the factory sub but will be replacing it once I get wheels/tires/fenders. Luckily mine works and doesn't distort for now, but I did put new speakers in the front and sound bar which dig about as deep as the sub. *shrug*|
|08-10-2012 10:08 AM|
Well, no wonder the sub was making noise. Too funny! New Quadratech Sub with polyfill stuffed in the box sounds just fine. NO mods, 45 min start to finish. (see attached)
|08-07-2012 01:41 PM|
|terpsmandan||I have the CVT652 and it sounds great. Not as good as going with sub behind the back seat but i need the room behind the seat.|
|08-07-2012 08:18 AM|
Skinny Pedal makes a mount that goes there but I couldn't bring myself to spend $50 on it so I made my own. Mine is not as good but it was free and got the job done. I saw a post where someone made one out of wood. I used his idea for mounting but used an old metal parts bin shelf.
|08-07-2012 07:41 AM|
|rubiconvict05||So the amp is under the steering colum? THis is the first time I have seen this area.|
|08-07-2012 07:30 AM|
|A_Jeeper||I did the 2ohm 6.5 CVT in the stock box with a DX500.1 monoblock. It's too much amp for the sub but it was a great deal. I just turn the gain way down (which I would think keeps it cooler).|
|08-07-2012 05:49 AM|
|08-07-2012 03:01 AM|
|rubiconvict05||Ok thanks So I now have one component on the list, and where to get it. I really appreciate it. I have a factory sub and not looking for a pounding bass monster but something I can get loud and clear. Basically anything over the factory paper is better. I figure new head unit, new speakers in the front and sound bar, and a new sub with an amp. Hell if I can find a decent secondary amp Ill power everything.|
|08-07-2012 02:33 AM|
2OHM: Amazon.com: Kicker 6.5" CompVT Car Subwoofer 2 OHM 10CVT652: Electronics
4OHM: Amazon.com: Kicker 6.5Inch Shallow Mount Subwoofer 4 Ohm: Car Electronics
|08-07-2012 02:17 AM|
|rubiconvict05||Ok so the general concensus is that the kicker sub is the way to go? and It has to be a 6.5? With the mounting tabs trimmed is there any stability issues while bouncing around on the trail?|
|08-07-2012 01:46 AM|
|08-07-2012 01:32 AM|
|08-07-2012 12:43 AM|
May want to check the fuse for the existing factory sub.
As for replacements, should we use SVC or DVC? I was looking at aftermarket subs and it seems like there are a couple different ones that could potentially fit. I'm not a huge fan of Kicker; used Elemental Designs in all my previous vehicles.
|08-06-2012 08:20 PM|
|jeepwayoflife||Yes. Don't get that replacement sub. Still low quality and not worth the Money at all. Get the kicker 6.5". I had the pyramid 6.5" before and blew it in a few months. Got the kicker 6.5" and its a world of difference. Totally worth the money and just requires a little snipping of plastic for it to fit. 5 min job. As far as the amp, you will need to run a hot wire directly from the battery to the amp. My amp is in the insta trunk so its safe from weather and theft. I ran the wires under my carpet.|
|08-06-2012 08:12 PM|
|Spencer11496||I just installed a kicker 6.5" CVT yesterday and just connected it brown positive and grey negative then taped off the black and red wires and it kicks pretty good. It's not overpowering, but you know it's there. It was $70 on sonicelectronix with free shipping, but others have gotten them for $55 off of amazon.|
|08-06-2012 05:58 PM|
Quadratec factory re-placement sub
Upon installing an aftermarket head unit I noticed the facotry subwoofer is not working. I have not looked further into the problem, but it seems as if the sub is not getting power, or has been un-plugged.
After reading many people replace the factory sub with an aftermarket matched with an amplifer. my question is?
* If you replace the sub with an aftermarket. Do you have to run a power wire through the firewall, or can you tap into the power already running to the stock amp.
recently while browsing Quadratec I came across what is called as a plug and play, aftermarket, sub. (see this)Quadratec Exclusive TJ REPSUB - Replacement Center Console Subwoofer for 01-06 Jeep® Wrangler TJ & Unlimited - Quadratec
Has anyone tried this out? is it worth the $90.00 or is it better if you want a sub, to just go aftermarket. I do not want alot of bass, but we all know music sounds better with a little lower tone in place.
any comments on the Quadratec sub would be appreciated. Also if any suggestions of why the factory sub is not working would be great so I can keep them in mind.