|08-22-2012 04:50 PM|
JKS B1 Body Lift
|08-22-2012 04:42 PM|
|08-22-2012 04:40 PM|
how to install them. The bl/mml will also enable you to do a higher tcase skid and stronger higher gas tank skid down the road if you want. That is also known as a belly up or tummy tuck...gets rid of the stock low hanging, weak tcase skid.
|08-22-2012 04:33 PM|
This is a good BL kit:
|08-22-2012 04:22 PM|
|Baseball_14king||What's a nitro charger shock?|
|08-22-2012 04:10 PM|
|08-22-2012 03:34 PM|
Yep, you have a 2" Spacer lift (Budget Boost).
Your stock shocks work fine with it. Personally I would keep the stock shocks unless you are willing to upgrade them to a OME or Bilstein which are about $100/ea. Lots of crap shocks out there in the $30-$40/ea range that are harsher than your stock oem shocks.
Here is what I would recommend for you in the short term. I would get a 1.25" body lift and don't worry about your changing your suspension right now. That combo (2"bb and 1.25"bl will be just fine until you have time to research what you want/need for springs, SYE, CV driveline, etc.)
You will be able to have lots of fun with that combo for mild offroading.
|08-22-2012 03:25 PM|
|08-22-2012 03:13 PM|
|Baseball_14king||Is there a certain kind of shocks I should get?|
|08-22-2012 03:10 PM|
|jeepwayoflife||You already have a 2" (i think) Budget boost Those are stock shocks though, so you should get longer shocks that are meant for a 2" lift|
|08-22-2012 03:05 PM|
|08-22-2012 02:54 PM|
|Baseball_14king||I thought I just did. But I guess they didn't upload|
|08-22-2012 02:47 PM|
|08-22-2012 02:38 PM|
|Baseball_14king||Did my pics not upload?:0|
|08-22-2012 02:24 PM|
|08-22-2012 02:23 PM|
|Baseball_14king||Yeah I can. But I don't think I have a lift. But I might? Is there a way I can tell? Or like a picture I could take to show you all?|
|08-22-2012 02:21 PM|
|Baseball_14king||Is there a specific type of lift. I know there are like different ones. One guy said he had a old man emu suspension lift and a rough country body lift|
|08-22-2012 02:20 PM|
|Dextreme||If you have 33's, you likely already have some sort of lift or you would be rubbing really bad. So why change it if its working for ya? I bet you can get out and have fun as is.|
|08-22-2012 02:16 PM|
|ILL_state||you could go with a 2 inch suspension lift and a 1.25 BL|
|08-22-2012 02:11 PM|
|08-22-2012 02:06 PM|
|Baseball_14king||That's my jeep|
|08-22-2012 02:04 PM|
|Baseball_14king||Damn. When I bought the jeep it already had the 33" tires. So as far as all of the stuff you we're saying I have no idea😞|
|08-22-2012 02:00 PM|
Well first, what do you do with your jeep? Rock crawling, weekend 4wheeling, dirt roads every once and a while, or something in between? You pretty much have 2 general choices. You can get a total lift kit (longer control arms, bigger springs, and longer shocks) Or you can get a budget boost (Spacers that go on the top of your stock springs to increase their height, and longer shocks) The Budget Boost is the cheapest option, but you can run into problems like coil bind at full flex because of the spacer. For serious offroading you will probably want a total lift kit because of its better ability to flex without coil bind and it will technically be done "right" because you will have longer control arms that are meant for the lift.
As far as what size lift for 33" tires, that also depends on what you plan to do with your jeep. I have a 3.5" lift and can flex pretty well with 33" tires. I have heard people run 33" tires with a 2" Budget Boost and a 1" body lift. A body lift simply raises the body of your jeep off of the frame, giving you more clearance for tires.
What rear axle do you have? If you have a dana 35, you will probably want to look at upgrading that before 33" tires. Most people in the offroading community will agree that the dana 35 has no place in 33" tires, and even 31" can be pushing its limits. Some people snap their dana 35 with too much gas from a stop light, while some run them for years on tough trails with no problems. The axle has been pretty well described as a "crapshoot"
If you get a 3" lift or higher, you will probably need either a SYE with new driveshaft, or a transfer case drop. The correct way to do it would be a SYE (Slip Yoke Eliminator) and a CV driveshaft because it will give you more clearance compared to a transfer case drop and wont give you any trouble with the 4wd linkage or your ability to shift gears. With a SYE you will also need adjustable rear upper control arms to adjust the pinion angle. For this reason, many choose to simply do the TC drop because of its simplicity and much cheaper price tag. Some people can run a 3" lift with neither and be fine with no vibrations, and some need a TC drop or SYE with a 2.5" lift, it just depends.
As you can see, its a whole lot of stuff to just go to 33" tires, and stepping to 35" gets even more!
I hope I covered everything... BTW, Love the dark blue color on a jeep!
|08-22-2012 01:57 PM|
|Baseball_14king||I don't really have a price range set yet. Since I'm new to the whole jeep thing. I don't plan on going super hardcore. But every now and then I'd like to get out and have some fun|
|08-22-2012 01:55 PM|
|08-22-2012 01:42 PM|
2001 tj lift
I just got a new 2001 Tj a month ago and I was wondering what a good lift would be to put on it. It has 33 inch tires