|08-26-2012 03:07 AM|
Since then I have upgraded gears, axel shafts (only for the 44) put an arb in the but and and LSD up front. And bought a new driveshaft with a slip yoke eliminator (sye)
Do it right the first time and get Axel shafts and new gears so you don't destroy them.
Also with 35s your gonna need to look at a sye because the angle of the drive shaft will be off with that large of a tire. Which is why I bent mine. If I knew all this before hand I would have saved hundreds and buying a new driveshaft....
But to learn you have to experience.
|08-26-2012 02:25 AM|
|05silver_sport||I'm planning on getting 35s I have a 44 in the back and a 30 in the front they will both hold up to them but I'm gonna regear to keep my power closer to stock. I might upgrade the axle shafts on both but from what I've heard and seen it it isn't a necessary modification to run 35 inch tires.|
|08-26-2012 02:06 AM|
|dstevens243||I mean I have 33s and a d44 in the rear|
|08-26-2012 01:45 AM|
|dstevens243||Didn't mean any disrespect, I have 33's upfront and D44 in the back, would like to go to 35's|
|08-26-2012 01:31 AM|
|05silver_sport||My bad just trying to help. But don't spend money on a 44 up front the 30 should work fine up to 35" tires so maybe just invest in some chromoly shafts for the D30 and you'll be set.|
|08-26-2012 01:25 AM|
|dstevens243||I get that|
|08-26-2012 01:18 AM|
|05silver_sport||Whereas the rear is centered|
|08-26-2012 01:18 AM|
|05silver_sport||Dana 44 for the front is a different model than the rear since the diff is closer to the driver side|
|08-26-2012 01:17 AM|
|dstevens243||I would have to regear the 44?|
|08-26-2012 01:10 AM|
|Jcole231||In the process of finishing 8.8 swap if u have a d44 in the rear now thats fine. The rear would not be compatible with the front|
|08-26-2012 12:57 AM|
|dstevens243||Oh thanks, newb|
|08-26-2012 12:51 AM|
|Jcole231||The f-150 8.8 is wide, u need one from an explorer|
|08-26-2012 12:08 AM|
|dstevens243||So just to elaborate, my buddy hates his f150, understandably so, so I was just thinking of taking his 8.8... What would I have to do?|
|08-26-2012 12:02 AM|
So I wanna put my d44 up front and a ford 8.8 in back, what needs to happen, or do I have it reversed?