|06-06-2013 03:02 PM|
|The Silver Gorilla||Replaced the relay, and followed the wires back as well as i know how (this is my first time dealing with something like this).|
|06-06-2013 02:31 PM|
Did you follow the wire back up front to be sure you don't have a break in it somewhere? Checked the Fuel Pump Relay?
If you need a wiring diagram, PM me.
|06-06-2013 12:46 PM|
|The Silver Gorilla||^^same issue|
|10-15-2008 01:18 PM|
i hope you like high taxes and socialized medicare...anyways have a good day!!!!!!!!!!!!
|10-15-2008 01:09 PM|
|chezuki||lol, almost exactly 1 year old...|
|10-15-2008 11:44 AM|
|captflyte||What did you figure out? I have same problem|
|10-16-2007 02:39 PM|
95 YJ Fuel Pump, no power at connector?
I have a 1995 Jeep Wrangler with a 2.5 4 cylinder, fuel injected.
The fuel pump isn't working. No 12VDC at the connector going to the pump.
My gas gauge is working, but the fuel pump isn't pumping. When I connect an external 12 VDC to the fuel pump, I can hear the pump working, get fuel pressure at the injector rail and the Jeep starts.
I traced the the wire ,Green with Black stripe (GRN/BLK), from the fuel tankback to the power distribution center.
All my fuses and relays look and appear fine. Any ideas?