|10-16-2008 01:12 AM|
You can try swapping the shafts but i personally had bad experience with it. I think you'll have to warm the gear up a bit to loosen it since its very brittle. Anyhow i remember i hit it and it cracked..
Another person on the jeep forum says he has done it successfully so..
You can also try your dealership.. ask for part 52067626
Also do your self a favor and buy an O ring.
|10-15-2008 11:27 PM|
|10-15-2008 07:16 PM|
|10-15-2008 06:03 PM|
yehh.. the pumpkin will have a different number of bolts...
|10-15-2008 05:39 PM|
|10-15-2008 05:38 PM|
|10-15-2008 05:36 PM|
|Jma20a||how do i tell the ratio if the tag is missing? i have a '99 5 speed 4banger, i looked were the picture shows but there is nothing there.|
|10-15-2008 05:30 PM|
|AzTJ||MOPAR 52067631 - 31 Tooth Speedometer Gear for 93-06 Jeep® Wrangler YJ & TJ - Quadratec|
|10-15-2008 05:16 PM|
|10-15-2008 05:13 PM|
|10-15-2008 05:07 PM|
|zpratt4||well, i just went out and looked at mine. i have the 3.07. everywhere i have looked online i can't find anything that works with the 3.07 and 33" tires. any suggestions, or does nobody make a gear for that? it seems like it would be pretty common.|
|10-15-2008 05:01 PM|
|10-15-2008 02:50 PM|
|Jerry Bransford||The '99 Sport came only with 3.07 or 3.73, Jeep stopped installing 3.55 after '97. Look at the steel tag held between two differential cover bolts at its 9 o'clock position, you'll find the ratio embossed into that tag. Because there is a .01 ratio difference between the front and rear axles with some ratios, it could for example say "3 74" or "3 73" (there is no decimal point when looking at the embossed ratio).|
|10-15-2008 02:38 PM|
|10-15-2008 02:36 PM|
Do you have a D44 or D35? Auto? If it's a D35, 3.07's... D44, 3.73.
Protect your Jeep while rock crawling with side rocker panel guards & skid plates from Skid Row Automotive, Body Armor, Rugged Ridge, Olympic 4X4 Products & Warn. - Quadratec
|10-15-2008 01:48 PM|
|Giancarlo||you need to check how many bolts are on the axle hub and what shape it is.. or you can check the tag on the axel.. year and model doesnt matter because wranglers had the option from the factory to come with diff axle gear ratios|
|10-15-2008 01:05 PM|
|JeepCommandoja||i think you most likely have 3.07 gears. thats what i have in my 98 sahara|
|10-15-2008 06:39 AM|
|4Jeepn||I will guess you have 3.73's. Also if you have an axle tag on the diff, it might say on there as well.|
|10-14-2008 11:30 PM|
axle gear ratio
can anyone tell me what the axle gear ratio is on a 99 tj sport? i want to chang the gear so the speedometer will be right for my tires but i don't know what the gear ratio is. i have 33x12.50 tires.