|09-10-2012 07:18 PM|
|09-10-2012 07:13 PM|
If I can send you what I'm looking for could you give me an idea of what you would charge to do it?
|09-06-2012 08:12 PM|
|09-06-2012 07:23 PM|
I may look you up to concerning some welding.
|08-30-2012 03:40 PM|
|kfdjason7620||If you can imagine it, I can build it out of metal!|
|08-30-2012 03:28 PM|
They're in my head right now, but I can put them on paper.
|08-30-2012 03:00 PM|
|kfdjason7620||You got any ideas or plans on paper?|
|08-30-2012 02:48 PM|
Awesome! I'll check on that. I appreciate it. Good luck with the class!
|08-30-2012 08:19 AM|
Gotcha. You could check on CL for custom welding services, I've seen folks barter their welding skills for stuff.
Personally I plan on taking a few mig welding classes at the local comm college to do something similar
Hope this helps
|08-28-2012 01:31 AM|
|08-27-2012 03:16 PM|
Not sure if you found some to fab your bracket/shelf thing
My suggestion is to reach out to a club to see who their members make stuff
You may want to check out Quadratech and 4wd jeep essentials. Both give out free catalogs
Hope this helps
|07-23-2012 01:07 AM|
|07-14-2012 02:19 AM|
|silver rubi||help... anyone??|
|07-13-2012 02:10 AM|
Design and fabrication help needed
- Mod- Not sure if this is the correct thread to post this in. Please move it if you need to. Thanks. -
I am looking to design and fabricate a custom locking bracket for my 2006 Rubicon to mount a HAM, CB, Scanner, and EMS Radio, as well as switches. I am also looking to design and fabricate a locking box for the "trunk" area to mount the actual radios and 2 gun safes.
I am new to this and have no idea how to fabricate. Any suggestions are welcome!
Is anyone in the Richmond, Va area able to help me?