|11-29-2008 06:20 PM|
I got all of my body armor , tube fenders , rock sliders , corners , and cage done recently at Trent Fabrication . Here are some pics . Apparently I can't post pics so here is a link
Trent Fab TJ Build - Page 2 - Pirate4x4.Com Bulletin Board
|10-28-2008 09:18 PM|
|Rawkon||you can do it Jerry. you just gotta take your time and make sure everything squares up right. I had to rush a couple times and if you look closely you can tell. Im still waiting on some Landrover LR2 turn signals. or i may just put in some CJ7 turn signals. I ended up coating them with a spray on bed liner and it came out pretty good. keeping the stock inner fenders works just fine too.|
|10-28-2008 07:58 PM|
|10-28-2008 07:37 PM|
|flattietj||u should live in ohio where there is no fender law.......i have no fenders anywhere|
|10-28-2008 05:30 PM|
|10-28-2008 05:22 PM|
its easy I welded my fenders up myself
as long as your welds are penetrating the steel and you have mechanical and some light fab skills its easy
for cutting my factory fenders up I used the poison spyder fender install instructions
|10-28-2008 02:47 PM|
|10-28-2008 02:39 PM|
|10-28-2008 02:24 PM|
I put my blinker in the 1" hole in the tube fender
I picked them up from genright
|10-28-2008 11:59 AM|
|silvergoat||I believe Treks are building rear tube flares that will bolt on useing the factory mounting holes without having to buy complete corners.|
|10-28-2008 11:41 AM|
sniper fab sent me some good stuff. I did the weld it yourself kit for 200 bucks
you could always temp mount your plastic fender flares for street use and take them off for the trail
|10-28-2008 10:53 AM|
Treks/TnT makes 8" flares, heres the link.
Treks Offroad Products - Replacement Tube Fenders
|10-28-2008 01:53 AM|
sniper fabworks with the 3" flare
|10-28-2008 12:20 AM|
|10-27-2008 11:00 PM|
|1BLKJP||Check out Genright or Sniper Fab here in the states. If I remember rightly I believe they might have what you are looking for.|
|10-27-2008 10:56 PM|
|Giancarlo||i think you should fabricate your own... i think it would come out better and it would meet your specifications|
|10-27-2008 10:55 PM|
|10-27-2008 10:55 PM|
|Scout||Sounds to me like you need the 6" tube fenders and 1" narrower tires.|
|10-27-2008 10:05 PM|
TNT only makes 6" tube fenders.
Please help me. I need 7" tube fenders!
|10-27-2008 12:57 PM|
|10-27-2008 12:55 PM|
|Giancarlo||have them custom welded for ur jeep... and just blinkers and mount em on top|
|10-27-2008 12:30 PM|
All the companies I asked have 6" tube fenders and they donīt want to make 7" fenders for some extra money.
|10-04-2008 01:35 AM|
|AzTJ||I believe TNT or PSC makes them with 6 or 7" flares.|
|10-04-2008 12:55 AM|
you can get them with a 6" flare
as far as the lights they have led lights and a blinker relay for that
there are some companeys that will make a 7" flare for an extra fee
|10-04-2008 12:20 AM|
Tube Fender ???s
I think about buying some tube fenders.
But our laws over here say, that the thread of the tires has to be covered by the fenders or fender flares.
Is there a tube fender out there that is as wide as my stock fender with teh 7" fender flares?
Thatīs what Iīm searching at the moment.
How do I install front blinkers and sidemarkers with tube fenders?
Thanks in advance.