|10-22-2006 12:29 PM|
Good luck, Hank.
Thanks, Mudweiser. I'm on a budget so more options are always good.
|10-22-2006 12:24 PM|
|10-22-2006 12:20 PM|
|Mudweiser||I had the problem with mine after puttin the lifts on. But i replaced the shifter with a B&M short throw shifter....dont have any issues at all because the shifting motion is very little. And no other modifications to the truck necessary.|
|10-22-2006 11:21 AM|
|04tjinsa||Did You Install A Transfer Case Drop? If You Did You Will Need To Pull The Shifter Out And Heat It Up And Bend It Forward A Little.|
|10-22-2006 10:12 AM|
|Hank||No problem, I'll be doing the same thing to mine on Thursday and will let you know how it turns out. I have to adjust my 4wd shifter also to get it to go into 4LO. Good luck.|
|10-21-2006 10:37 PM|
Yes, it goes into 4Lo without any trouble.
Wow, the roughcountry site has a lot of great info. Thank you, Hank!
|10-21-2006 10:13 PM|
You might have to make some adjustments to your shifter or where the shifter is hitting on the opening in the floor. Does it go into 4Lo? I just put a 4inch on mine and I'm having the same problem.
http://www.roughcountry.com/install/668S.pdf Check out the section about the floor pan modification. I think its on the last page.
|10-21-2006 10:01 PM|
|amy||Yes, a 3-4 inch lift with 33s. Sorry, I forgot to mention that.|
|10-21-2006 09:52 PM|
|Hank||Do you have a lift?|
|10-21-2006 09:51 PM|
My TJ doesn't like 2nd gear...
and it's not crazy about reverse either.
It grinds a little when shifting into 2nd and sometimes, pops out of grear. It also is sometimes stubborn about going into reverse.
I read, in other threads, that it could be motor/tranny mounts or clearance problems(?)
If so, how would I check?
If it's clearance problems, how can I fix it?