|09-07-2012 02:56 PM|
|09-07-2012 01:55 PM|
I have a 2" BB lift already. Cant afford what it takes to put a bigger suspension lift on. Was thinkin I could get another inch or so with a BL that doesent put me at risk of DW or anything like that.
It was my understanding that the 1.25" BL wont cause this and wont require an allignment or anything. Just need to adjust the linkages.
|09-07-2012 01:00 PM|
|09-07-2012 12:36 PM|
|doubblea||I suggest going with coil spacers instead of a higher body lift. Just my opinion though.|
|09-07-2012 12:24 PM|
|Jerry Bransford||Just make sure to avoid the temptation to go with a body lift taller than 1-1.25". And I would not pay big $$$ for a body lift from companies that replace the OE rubber body mount with a polyurethane replacement. First, the OE rubber mounts don't wear out like the poly mount manufacturers want us to believe. Next, polyurethane mounts transmit vibrations into the passenger compartment far more readily.|
|09-07-2012 12:20 PM|
Most 1.25" kits such as JKS comes with the bracket.(lift carpet, drivers side next to shifter to access bolts) Installed here:
|09-07-2012 11:48 AM|
|jebby||linkage as in my stick shift into the top of the tranny and my 4x4 stick? no ride issues other than the linkages? are adaptors that fix the linkage issue available?|
|09-07-2012 09:14 AM|
|GoldenSahara00||Install isn't hard, linkage might get screwy. Those are your issues.|
|09-07-2012 08:51 AM|
school me on body lifts
I have a 97 tj (2.5L 5 speed stick) with a 2"bb lift and 31's. I want more but am not ready to go to a proper suspension lift. Its my DD and i dont do anything crazy when im offroad (i do go off road but its mainly mud and rutts around here until snow) I am thinkin of adding a 1.25" BL but i dont want to spend too much or do anything too difficult. I also dont want to mess around with linkages or DW or anything. What are the cons of a small BL and what involved.
please forgive my ignorance lol