|08-27-2013 03:28 PM|
|grsn67||Look for the one that is titled "Long Beach Meet" - if you can't make it this Thursday I can let you know when we plan on going out on a trail run. It's super fun man. We usually have a caravan of 10-15 Jeeps.|
|08-27-2013 01:55 PM|
|08-27-2013 11:59 AM|
2850 N Bellflower Blvd
Long Beach‎ California‎ 90815
If you wanna come down and meet some cool people. I don't know where u come from but last time we had a guy come down from the near the SD area.
|08-27-2013 09:47 AM|
|08-27-2013 04:01 AM|
|08-27-2013 03:40 AM|
|CTFF||I have the Ultra Mesh JK2D on my '13 2 Door Sport. I love this top! It cuts down on the sun and stops all the leaves and tree junk from falling into my Jeep when it's parked. I only wish I had got the trailmesh as the ultra mesh is pretty stretchy.|
|08-27-2013 03:10 AM|
|grsn67||Also had to remove the front wind deflector after the jkini jnstalll because it was causing too much wind noise. Now without it, the seems to have helped a bit. More comfortable ride|
|08-27-2013 03:08 AM|
|08-27-2013 03:03 AM|
Great info and great photo. Wish I got the tan now. Damn. Thanks!!!!
Don't take this the wrong way, but can I see your whole rack? It looks cool and I can only see a sliver of it in that photo... 0_o
|08-27-2013 02:55 AM|
Hope this helps
|08-27-2013 12:31 AM|
|StarBrite||For what it's worth, shipping and delivery was REALLY quick, too!|
|08-26-2013 10:43 PM|
|08-26-2013 10:30 PM|
|jj77||If you email them with questions and leave your # they will call you within a day. The guy in the install video is the one who has called me back twice. This company is amazing. Top notch. Its nice to talk to a human instead of emails. You won't be dissapointed in this product.|
|08-26-2013 02:49 PM|
|08-26-2013 12:40 AM|
|mikebot||Went ahead and pulled the trigger on the JKini-4D (Black). Total price was $65.98 shipped to CA with promo code WF10. We shall see...|
|08-26-2013 12:34 AM|
Thanks for all of the detailed info and quick responses folks!
|08-26-2013 12:28 AM|
Mike, you can also reinstall the front spider balls with the freedom panels on so you don't lose them. There was another spiderweb shade thread earlier this summer that I posted some pictures in. Let me know if you can't find it and I will try to.
We have the full version, not the jkini and we took the top off to install. Not sure what the difference is with the shorter one. Putting the whole setup back on with the spiderweb shade installed was a piece of cake. The only trick is that you have to turn the freedom panel latches THROUGH the spiderweb shade. You won't be able to reach them (unless you are able to because it is shorter) with the shade on. But it's super simple and pretty obvious once you actually have the shade in hand. I'd shoot you a video, but we are in Austin house hunting right now and time is tight.
And for what it's worth, the spider balls don't thread THROUGH the bolt holes directly, at least not on the full shade. We have ours attached to the outside cage. Maybe you could put yours around the sound bar, rather than through the freedom bolt holes?
Hope this helps!
|08-25-2013 11:54 PM|
|08-25-2013 11:18 PM|
|mikebot||Also, how does this shade compare to the Rugged Ridge Eclipse?|
|08-25-2013 09:53 PM|
Hi guys! I'm really interested in these shades for my 2014 JKUR in the hot southern california sun, but I have two concerns. Note that I only want to cover the freedom panel area, over the driver and passenger.
Concern 1: The video says you have to have the *entire* hard top off to properly install the spiderweb shade. OK, I guess I can buy pizza and beer for my neighbors to help me lift the top off and then put it back on, but is there any other way to do this with a one-man team? I live in an apartment complex and don't have a hard top lift. I would also like to be able to install and remove the shade on the road, since I wheel with my girlfriend.
Concern 2: So you say that the hard top can be re-installed with the spiderweb shade installed, but is there a video of this anywhere? Obviously you'd have to take the spider balls out of the threaded freedom panel bolt holes, so....I have to buy pizza and beer for the neighbors next time I thread the spider balls through?
This looks like an epic product, but the fully understanding the flexibility of installing it on-the-go, and without removing the rear third of the hard top is holding up my purchase. Thanks in advance for your 2 cents!
|06-12-2013 10:58 AM|
|Rmcroslin||I am really considering a red 4d trailmesh for my new 10A JKUR (white with red). Or maybe blue, or grey. Grey is probably the coolest temp color, but red or blue would look real good. I wish I could see all three on my Jeep, so I could decide.|
|06-12-2013 10:51 AM|
|06-12-2013 10:44 AM|
|06-12-2013 10:32 AM|
|Spyder721||Are there any coupons for their website?|
|02-22-2013 10:43 AM|
To users of the full four door Spiderwebshade:
I installed mine and am having a slight issue with some buffeting across the top of the soundbar with the shade. I've read some that say putting a towel under there helps. That's not as clean a solution as I'd like. There must be a better fix.
These are my thoughts.
1) Place a small strip (~24") of black window trim seal across the top of the soundbar. The shade would contact that instead of the plastic soundbar.
2) Open the velcro covers over the hard top screws and secure that point through the hard top holes. I don't have a hard top so those holes are free. What mechanism could I use to put down through the shade from the top that would still put tension on the top to keep it from flapping? I'd wan the top to be flat so I could still put the soft top on and not have a bulge up there.
I'd prefer option 2 but I'm not sure how to implement it.
These two holes where you see spider balls are what I'm talking about using.
But I can't wrap around the soundbar because I have the full 4-door version. There are two holes in the shade though that line up with those two holes.
|09-29-2012 02:31 PM|
|SHYUperman||Quasi installed my TrailMesh for my JKU. Love it! I have to go back and install the shade a little tighter.|
|09-29-2012 11:21 AM|
|JPi1||As a dealer for Spiderwebshades in Sunny and hot Southern California, we run the Spiderwebshades on 3 of our shop JKs. They are a very good alternative to no top or a bikini top. On my JKUR, I run the JKini, then the full size shade on top of that so the front seats have a little more shade for those hot days on a slow 4 low rock crawl trail. When your above 6000 feet, you burn a little easier and this took care of that for me, and you still get the open air of the Spiderwebshades.|
|09-29-2012 10:29 AM|
|09-18-2012 08:37 PM|
|Sgt93||I got my Unlimited Shade Cage from Krawl yesterday but will not install until Spring. Shoulder surgery is a b__ch. I'm already waiting for Spring.|
|09-18-2012 07:03 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|