|11-09-2008 01:03 PM|
|Lost in Space||
If your uncle only has a 1" BL on his Rubicon, I think 33x10.5's is really pushing it. Did he add extended bump stops to limit up travel? Not doubting you, just wondering. What is he using for backspacing on his wheels?
|11-09-2008 12:03 AM|
|flattietj||one of my uncles runs a 02 rubicon with a 1"bl and 33x10.5 mts with no rub at full flex and full lock.........i think it is doable for u|
|11-08-2008 09:01 PM|
although they are thinner, they are large in diameter. When you turn fully, they might rub the control arms.
This image is from a cherokee but it shows the concept.. (tjs lower control arm setup is similar)
|11-08-2008 08:48 PM|
|11-08-2008 08:27 PM|
well your new tires are thinner than your current stockers.. they should fit the stock rims although you might have some rubbing at full lock.. I hope some one can come in here and confirm that 31.5" tall 9.3" wide tire will fit the stock rims without rubbing..
235/90r15 should be the same height as 235/85r16
|11-08-2008 08:24 PM|
|Mooseman||Hey Triple88a, thanks for your input. What 15" tire size will give me the same overall measurements? I would rather keep my 15" wheels and save a few bucks.|
|11-08-2008 07:10 PM|
also is there a chance we can change your mind from 16 to 15" rims?
They are much cheaper, you get some extra sidewall flex if you air down and they look much better.
At last yes i was talking about articulation.. a 2" total lift would be perfect for those tires. You say you have a 1" budged boost lift? add another in body and be happy
|11-08-2008 07:02 PM|
Jma20a, I'm thinking you're right! For some reason I was thinking he was talking about sidewall flex. But he is correct in saying that with the tall tire I will lose some articulation without rubbing.
|11-08-2008 06:30 PM|
|11-08-2008 05:47 PM|
Not sure exactly how big 235/85/R16's are. However I have a 06 myself. Had 30x9.5 when I bought it. Upgraded to 31x10.50s, they fit perfect. Not to wide, not to skinny. Look like they're ment to be on a stock 06 wrangler. My wheels are 15x8. Not sure if this helps. Good Luck
|11-08-2008 03:15 PM|
|Mooseman||I forgot to say that they are 10 ply tires...so flex is minimal. If they had a less stout sidewall, I would be leary of that much tire between the wheel and ground. I've been running these (10 ply only...load range E) on my old hunting truck for years with no problems and I love the added ground clearance and the added sidewall puncture resistance. You brought up a good point though, it will affect handling somewhat.|
|11-08-2008 02:59 PM|
about 31.5" tire.. and 9.3" wide..
It will fit if you dont go crazy with flex.
also are you planning on running something bigger in the future?
|11-08-2008 02:44 PM|
Another Tire Size Question
I've got a 2006 Sport and was thinking of replacing my 30x9.50/R15's with 16 inch wheels and 235/85/R16's. With no lift other than 1" spacers on the front, will this cause any problems? I'm looking for a tall, but "not so wide" tire....they seem to work well up here in Wyoming snow. Also, what width of wheel?...7" or 8"? Just wondering if anyone has used this set-up. Any input is greatly appreciated. Thanks.