|04-07-2014 08:20 AM|
|VansMudder||Yeah the stock shocks are good for up to 2" of lift. Most aftermarket shocks will list their fitment sizes the lowest starting from 0" to 2 " of lift then they move up from there for taller lifts.|
|04-07-2014 08:10 AM|
|Sofla Sahara JK|
|04-06-2014 10:03 PM|
|jbcctx||Installed the TeraFlex leveling kit. Should I be changing to longer shocks?|
|03-31-2014 03:10 PM|
General Grabber At2 305/70/16 on Level8 Trackers 16X8.5 with Teraflex leveling kit (2" front and 1" rear pucks)
|03-31-2014 12:45 PM|
just realized you said you already have the 1" pucks...haha those are for the front.
|03-31-2014 12:37 PM|
I have the spacers from the TF spacer leveling kit, but I do not have the sway bar links that come with the kit.
I want to use the 1" spacers on the front (as opposed to the rear) and keep the rear stock.
1.) Will the 1" spacers made for the rear fit in the front?
2.) Do I need the sway bar links if I'm only using the 1" spacers?
|03-31-2014 11:50 AM|
|03-31-2014 08:50 AM|
|VansMudder||I've had my sport parked beside numerous rubi's before my leveling lift and we were exactly the same height. I think the Rubi coils are a bit more robust is all. Most here that have 2 doors go with 4 door springs as it gives you a fair bit of lift as the 4 doors are a quarter ton heavier and have taller springs to compensate for the added weight.|
|03-30-2014 08:17 PM|
|03-29-2014 07:27 PM|
|Sofla Sahara JK||
33"s, puck leveling kit and flat fenders.
|03-29-2014 03:13 PM|
Would it be overkill to get the teraflex forged trackbar and adjustable control arms with the performance (coil) leveling kit?
Also, it seems most of you here have sports, would the 1.5" springs be a zero sum gain on a '14 rubicon? I ask because it seems popular to run rubi shocks and springs on sports meaning they must sit higher... Right?
I just want to run 33" x 12.5 duratracs as this is my daily driver
|03-28-2014 06:47 PM|
If that cost includes the Performanc leveling kit ( coils ) and the install that sounds about right. Just curious I called a local shop to see what they charged to install the lift and they said $320 which included an alignment.
|03-26-2014 03:31 PM|
|Sofla Sahara JK||
|03-26-2014 03:29 PM|
|Sofla Sahara JK||
|03-26-2014 03:28 PM|
|dhc-6||I installed the Tera flex pucks in 1:20 from start to finish, no front alignment needed and it took me just a couple minutes to straighten the steering wheel.|
|03-26-2014 03:27 PM|
|hypoxic1911||I did the install myself with some help from a friend. I had previously never even taken a tire off, so it CAN be done by someone with limited experience, but willing to go slow. Having said that, I did majorly screw up the first step and disconnected both rear lower control arms!!!! that really sucked and it took 3 hours to get the bolts back in. So I did need an alignment after that. If you can get one cheap enough I don't see why it would hurt. Bottom line is that I learned a ton about what is going on under my jeep and will not be afraid when I want to change out my chocks next|
|03-26-2014 03:19 PM|
|Mike in the Hills||
With both the Teraflex leveling kit and performance leveling kit (JKU 2014), is a front alignment needed?
4 wheel parts, Jeep Masters and two other garages in Austin area are telling me its necessary to do a front end alignment. I was hoping to have a local garage perform the install but all the shops around here quote 3-4 hours of labor which appears to be a bit out of place based on how long I hear a few guys state it takes to do in their driveways. Basically around a total of $500.00 to $550.00 for the parts and labor. Is this out of line?
|03-25-2014 05:27 PM|
I order this stuff for my Jk unlimited 2012,this jeep is for on road only.
Teraflex leveling kit
do i need spacers? if so,do i need the for front and back?
or should i just get other wheels?
|03-25-2014 03:01 PM|
|Hammer287||?? I am looking to use my stock rims 255 75 r17 and move to Duratrack 33's I was thinking I had to add wheel spacers 1.5" ?? but am now wondering if a lift kit would accomplish the same thing. I. e. avoiding rubbing on hard turns. This might be a better alternative to the spacers since I'm not even sure if Spacers are legal in Connecticut|
|03-24-2014 02:46 PM|
|hypoxic1911||to bring this thread back from the dead... I'm currently researching wheels/tires for mu JKU: landed on the Duratracs 33's 285/70/17. Still looking at wheels, but with my tf 1.5 PERF leveling kit, what is the backspacing numbers I should be looking at? I see wheels I like, but they only come in, say, 5" bs. Do I really need to stay at 4.5 in order to eliminate any rub? not sure I want to run wheel spacers so I want to get the wheels right the first time. Thanks|
|08-21-2013 12:16 PM|
|08-18-2013 10:31 PM|
|08-18-2013 08:51 PM|
|razdds2||What is the specific TF coil leveling kit? I seem to get confused on the various vendors which is which. I want to replace my TF spacer leveling kit because it appears that my driver side spacers had become a bit uneven resulting in my spring appearing to bend.|
|08-18-2013 06:24 PM|
Here's another pic to contribute to the thread.
|08-18-2013 05:28 PM|
I am going to order the TF leveling kit for my 2007 JK X. I see in several posts that people say to use a Torque Wrench to reinstall everything. The problem is I don't see any Torque Values in the Teraflex instructions. Can anyone help me?
The other question I have is that on the Teraflex website for the Leveling Kit it states the following, "If you prefer to run the factory wheels, you may need wheel spacers for proper clearance". I had the stock steel rims with the 16" Goodyear Wranglers on them. I installed some new 18" tires/rims off of a 2013 Unlimited (Bridgestone Deuler AT). What does this mean exactly?? Do I need to install wheel spacers?? If so,what exactly do I need to buy?
|07-24-2013 08:43 PM|
|07-24-2013 07:55 PM|
|slimatsea||Please note that the PERFORMANCE leveling kit is 4 coils. There is no difference between installing that and any of the other basic coil lifts.|
|07-24-2013 05:41 PM|
|07-24-2013 04:56 PM|
|07-24-2013 04:27 PM|
|tupper||I'm checking out the performance leveling kit.... is this something that some one with a shade better than basic skills and tools can do, or should a pro do it?|
|This thread has more than 30 replies. Click here to review the whole thread.|