|12-03-2008 09:32 PM|
|Mooseman||Yeah, it doesn't work all the time, but when it does....it'll make ya smile. We use this stuff out at work called AeroKroil. I haven't seen it available at retail stores, but this stuff REALLY does help.|
|12-03-2008 09:27 PM|
|12-03-2008 09:22 PM|
|Mooseman||Another trick I used trying to get that top nut off was taking a 3/8" drill bit and drilling the side of the nut, it worked fast for me. Looking back though, I would have soaked 'em with a good penetrating oil for a day or so before trying to remove them.|
|12-03-2008 07:25 PM|
When I did my bro's 99 I took a 4 1/2 ang grinder and cut thos b@tch straight out. Man that job was a pain. If doing it again, I'd get the proper tool and air gun for it.
|11-29-2008 12:35 PM|
|Triple88a||lol also as you can see i ground off whatever i could from the threads as well to make my job easier.|
|11-29-2008 06:47 AM|
trip now i see how i can do it. I was putting my vice grips on the very top of the shaft above the bolt and it kept slipping off and tearing the metal up.
Now i see i can just cut off the plastic shroud and grab onto the shaft itself im sure i can get it loose
|11-29-2008 02:22 AM|
|11-29-2008 12:22 AM|
that makes me wonder about the rest of the rig...lol
|11-29-2008 12:11 AM|
|sean42069||depending on the shock design it may not work upside down|
|11-29-2008 12:10 AM|
a tip to get your shocks off in 5 seconds or less:
remove bottom. grab shock firmly, pull sideways hard and fast.
especially if they're the stock ones they snap off right at the nut,
|11-28-2008 11:05 PM|
|Kodiak Commando||Shocks are designed for compression and rebound. They are distinctly different valve scenarios. So it does matter if they are installed upside down. That doesn't mean that people don't get away with putting them in backwards. I've seen many guys invert RS9000's and think they work great. Bottom line is that they will work better when the shock is in the possition it was designed to be in.|
|11-28-2008 10:54 PM|
Ok so i sat out in the snow for about 4 hours workin on the front end installing the lift and "trying" to get my stock shocks off.
Well i got the front spacers installed. But i couldnt get the damn shocks off
I would lock down on the top stud and throw a end wrench on the nut and it would just spin and spin... finaly i gave up since i couldnt feel my hands anymore.
|11-28-2008 03:50 AM|
|KellyK||i forgot to mention that they are rancho rs9k ajustible|
|11-28-2008 03:04 AM|
I had my rough country rear shocks on backwards at the end before i got tired of them and replaced them, it didnt seem to make difference. *ahem*, they still rode like crap.
I believe that depends on the shocks though.
|11-28-2008 02:07 AM|
urgent shock question.
So i was a douche bag and bought a set of shocks from some guy here in town. After i got home i started to do a more intense inspection. And noticed that the hoop and stud were on the wrong ends...lol
My question is. Will they work if i was to turn them upside down. I would think that they would still operate the same.
I have set it up that im going to my brothers shop tomorrow to install them along with new springs and a spacer lift. Hense the urgent status.