|02-20-2014 11:02 PM|
|02-20-2014 10:57 PM|
|dvdsjk||With the kids camping is out for him too but he can get away probably for the say Saturday.|
|02-20-2014 10:53 PM|
|02-20-2014 10:32 PM|
No the wheels I had on them are all black. Or were all black! My buddy has a grand chetokee . He's building it up a bit. He wants to head out. Heres the old one.
|02-20-2014 10:24 PM|
|02-20-2014 09:49 PM|
Hey have you seen my old black jk in your part of the woods? I think its around your area. Black aev bumper wheels and snork!
|02-20-2014 06:38 PM|
|02-19-2014 10:34 PM|
|02-19-2014 09:45 PM|
Started the AEV lift yesterday! installed the front end so far as well as the front control arm correction kit!!
Bilsteins were a PITA to install! Unlike the Mopar witch have two nuts to tighten them on,the Bilsteins have a nut and you must hold an allen key on the top to tighten it! You have to cut some of the inner fender away to get it in there!!
The rear is going easier!! Got it about 3/4 of the way done tonight.
|02-19-2014 09:30 PM|
|02-19-2014 09:27 PM|
|02-19-2014 02:33 AM|
|jpw5274||nice build! I live in Pittston I was just curious to if you would be interested in wheeling at Rausch Creek Memorial Day weekend? trying to get a larger group from our area then drive down as a convoy|
|02-18-2014 09:23 PM|
|02-18-2014 08:22 PM|
|02-18-2014 09:43 AM|
|d90king||Very cool build! Digging the mini JK8!|
|02-17-2014 11:50 PM|
AEV lift is finally all here along with the river raider oil and tranny skid. Weekend project.
|02-06-2014 09:23 PM|
Ok down the home stretch!! This time the "Bully Dog tuner for Jeep" install. couple of pics for the install of the power cord and holder.
First I fished my favorite way ino the engine bay!
Second route the wire to an accessory lead on the fuse block.
Third, I tested an unused fuse bay that turned on with the key.
Fourth route the wire into the fuse block. I went as low as i could with the hole almost the exact size of the wire. it has to stay ow because of water tight lip around the box. Then caulk it in!
Heres the adapter for the fuse that they give you. Hooks on the stab.
Last "adapt" bracket to your needs! HehHeh!!
And mount!! ( ty wraps are temporary)
|02-06-2014 08:49 PM|
|02-06-2014 07:44 PM|
Definitely one of the coolest Jeeps I've seen!
Sent from AutoGuide.com App
|02-06-2014 07:33 PM|
|golferguy111||best 2 door build i've ever seen. You are taking the concept of customization to a new level. It's so cool to see someone treat the stock vehicle like a blank canvas, then turn it into a work of art.|
|02-03-2014 08:44 PM|
a little comparison on bumpers and corners.
Also installed the aFe High Tuck cat back system!
|01-25-2014 11:50 AM|
|01-25-2014 07:32 AM|
|blackmars||the coolest jeep i have ever seen!!nice build!|
|01-24-2014 10:26 PM|
|01-23-2014 11:52 PM|
|01-23-2014 11:30 PM|
|01-23-2014 10:03 PM|
|01-23-2014 08:55 PM|
Gate is on but im not too sure about it. Im going to cut a little more off the angles to show a little more tire. I also ordered more bolts for the gate from River Raider to match the corners.
|01-19-2014 03:46 AM|
|01-18-2014 11:49 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|