|12-01-2008 06:15 PM|
|atlsouthpaw||Thanks dude!!!! That was exactly the problem!|
|12-01-2008 05:00 PM|
|Jeep_Geek||Just had the same problem.. I traced it to the wire from the fuse box to the switch.. there was a short somewhere in it but it goes up in a harness so I just ran a new wire to the switch. works great now.|
|12-01-2008 04:47 PM|
|87YJWrangler||I know my fan is full of crap and natural debris like leafs and shit, is there anyway to remove the gaurds so I can clean them out????|
|12-01-2008 12:23 PM|
|Coyote_94YJ||Sounds like you have a wire shorted to ground somewhere. If you disconnect the switch and the fuse still blows, that would rule out the switch. You said the fuse blew with the motor disconnected so that means its not the motor. Dunno. I would start tracing wires looking for bare wire touching metal or something like that.|
|12-01-2008 07:57 AM|
blower motor problems!!
I have a 1995 jeep wrangler. The blower motor is not working. I can feel heat, just not blowing. The fuse was blown, so I replaced it. It blew again. I disconnected the heater switch from the blower...and the fuse STILL blew! Does anyone know if the motor is bad or is it the switch, or something else entirely? Thanks.