|12-02-2012 02:15 AM|
|Uncle Ugly||Well as u can see from the pics we got it done. Tera flex nuckle and Dom with heim joints for drag n tie rod. Nothing protruding through the body. It all fits with a lot of figuring n fabing. Will try to get some pics soon of all the stuff welded on this beast. It has great road manners and runs strait. Flex like crazy and good manners. Not a bad combo. Pics n descriptions to come on what we had to address to get it done on stock axles.|
|12-01-2012 08:36 AM|
Tim had another spectator when he took his JEEP out for a shakedown run!!
Not bad at all for a little guy!!
|12-01-2012 06:44 AM|
|JEEPDON||Yep; it's flexy for sure. He is probably going to have to do some extreme trimming around his front fenders. Maybe have to go to a rock crawler type hood or something.|
|11-30-2012 11:28 PM|
|cully||Thats turned out nice and flexy, looks great! Gotta love the coilovers.|
|11-30-2012 07:54 PM|
Couple more pics
Ya can kinda see the under carriage here
And the rear coilover
|11-30-2012 07:36 PM|
Timmy's JEEP Finally done
Coilovers on all 4 corners; Stock width axles, High steer conversion.
Still got some fine tuning to do
|11-05-2012 11:40 PM|
|10-16-2012 01:47 PM|
Since I am furnishing the garage for the boys to work in; all I am doing is drinking the beer; giving 'em shit; and taking the pic's.
All the "smart stuff" is up to them!! They have already built the new crossmember.
He is going to run 37's on it; and as for steering-- more smart stuff!!
|10-16-2012 12:02 PM|
What are you guys doing about steering?
What size tires will this thing be running?
Gonna build a crossmember for the trans mount or drill some holes in the new plate?
Have fun fitting CO's on TJ axles without going through the tub.
|10-16-2012 11:29 AM|
Try a "Timmy Two Springs LJ Build"
Looks like its gonna be a sweet rig though.
|10-16-2012 11:25 AM|
|UNCLE BS||All though a lot of work, Helping do the job with good friends, is a lot of fun. Even with the skinned knuckles, slag burns,ect....|
|10-15-2012 06:28 PM|
|Uncle Ugly||I know why its a suspension "package" and not a kit....It comes with the raw materials to do the job and pictures of what it should look like when it is done. If you can't figure out your geometry and do ALOT of fab work its not the one for you. You get joints and shocks and most of the brackets and tabs. The rest is cut weld and do the math.|
|10-15-2012 10:14 AM|
Timmy Two Springs TJ Build!!
To start; Timmy picked up this 2005 TJ rubbycon unlimited. We took him wheeling with us a few times, and his tires were rubbing loud enough in the wheel wells that we could hear him coming a hundred yards away( hence: rubbycon)!! Then he would get hung up on his belly like a turtle.
So; at that point, Timmy got pissed and got on the horn and ordered up this Genright Elite, long arm coil over suspension and all that showed for over a week was two coil over springs. (Hence the nickname Timmy Two Springs)!
But; enough of that; He has taken it all good naturedly!!
Cutting and grinding all the old brackets and mounts off of the frame and axles.
Then home fabbed the rear axle bridge.
4 link triangulated system going in
More to come as the boys had to go to work for another week to pay the bills