|02-20-2014 10:54 PM|
|02-20-2014 10:44 PM|
|02-20-2014 10:29 PM|
|kylekae||It's shrockworks I don't buy smittybilt anymore. I learned my lesson on buying cheap Chinese crap.|
|02-20-2014 10:22 AM|
|02-20-2014 10:13 AM|
|02-19-2014 02:42 PM|
|02-19-2014 12:49 PM|
Morris my pics
|02-05-2014 11:24 PM|
|kylekae||So word from the shop is that I got alloy usa rear chromoly and due to the rcv install, they replaced the inner axle seals up front, and due to a good mix up I got some alloy outer axel tube seals for free. Should have the jeep beck tomorrow, and then it's off to Morris Mt. On the 15th.|
|02-02-2014 05:05 PM|
|01-30-2014 02:41 PM|
|kylekae||Thanks, yea jeeps in the shop now getting the axle tube flange straightened and alloy usa rear shafts.|
|01-30-2014 10:56 AM|
Anyways, your Jeep is nice! Keep up the good work!
|01-30-2014 09:49 AM|
|MurphDogg||Damn it's looking mean as hell! Keep it up man!|
|01-30-2014 09:28 AM|
|kylekae||Well thanks to the ice storm in georgia, I slid out and bent a rear axle shaft in a curb. Well looks like I'm getting rear chromoly shafts.|
|01-27-2014 05:52 PM|
RCV's are in! Now to go test em.
|01-14-2014 01:07 PM|
|kylekae||Just ordered RCV axle shafts for the front should get them In within the weekend. And bows the perfect time cause my u-joints in my front axle shaft are chirping.|
|10-03-2013 05:32 PM|
|jeep4x4maniac||Sweet lookin lj man it looks mean. And workin hard for your stuff, you deserve it!|
|09-26-2013 11:35 PM|
|kylekae||So I think I'm gonna get a 50" led bar. I know I can get one cheap for $300 combo beam. I don't want to wast 200 on a mount. What do you guys think about mounting it straight thru the windshield frame. I can put two bolts through the top near the glass and I'll have access the nuts. And it should look clean. Options?|
|09-12-2013 11:41 AM|
The cut was easy just download the template form metal cloak and cut with a jigsaw. But heavy metal blades that work great. Only used one blade. When I cut my rivets out for the stock rockers I didn't cut enough of the rivet and then just pounded them out. Which causes little dimpled around all the rivet holes so I have a gap. Not to bad though.
|09-12-2013 02:00 AM|
Thanks I appreciate it!
|09-11-2013 09:44 AM|
|kylekae||Yea ill get them up later roday|
|09-11-2013 03:38 AM|
Do you have any more pictures of the rockers? I have MC Fronts and would like to see how you fit them because I like those a LOT but have hesitated because of the lack of anyone running them that I've seen.
|09-11-2013 01:55 AM|
|Nissantech||Man sweet looking jeep that bumper looks mean!|
|09-11-2013 12:38 AM|
|gsellars||i was there. i saw you on the obsticles|
|09-09-2013 10:28 AM|
Went to jeep fest in jasper ga this weekend and won $100 bucks for being the 1st to balance on the teeter toter.
Also drove up a huge dirt wall and flexed on a guard rail
|09-01-2013 08:01 PM|
Got them on. They were a pain to install with the body mounts and the 1 inch bl but it was defiantly worth it.
|08-31-2013 12:17 AM|
|08-29-2013 10:56 PM|
|08-29-2013 11:07 AM|
|fourty4magjr||Haha that's awesome man! I didn't purposely copy you but I have a bumper similar to yours (had it for 4 or so months now) that I had a guy make since they don't sell that one anymore and I have the metalcloak arched fenders on the way with the 6" flairs. Im in the middle of my savvy/ currie lift and 8.8 instal, super excited to see it complete now that I've seen how yours has turned out I know mine will look jut as bad.ss|
|08-29-2013 09:01 AM|
|kylekae||Last week I almost rolled. I reversed back to try a new line and as you see my front tire came up and I teeter tottered back an forth but she saved herself. Pretty scary stuff ill try to upload the video link later|
|08-29-2013 08:58 AM|
|This thread has more than 30 replies. Click here to review the whole thread.|