|03-02-2014 06:16 PM|
Top off doors off kinda day.
|03-01-2014 10:52 AM|
|03-01-2014 12:08 AM|
|02-28-2014 11:59 PM|
|02-28-2014 11:30 PM|
I guess you can't edit old posts on this forum so here's the updated mod list from the first page. Everything from the OX locker up I am planning to get done this year (37" Wildpeak MT's, Hutchinson Beadlocks, 44 swap, chromos, ect.). Other stuff like lighting, on board air, and engine swap will come in the distant future.
3" BDS Front Coils
4" Fabtech Rear Coils
Front Bilstein 5100's
Rear Fabtech White Bodies
5 17" Fuel Hostage wheels
5 33x12.5x17 Mickey Thompson Baja MTZ's
Custom tranny crossmember
Dana 30 4.10 w/ LSD (temporary axle)
Narrow Ford 8.8 Axle w/ 4.10 gears
Artec 8.8 Truss/Bracket Kit
Rokmen Rear Upper Control Arms
JKS 1 1/4" Body Lift
RC 1" MML
Front Crown Performance Braided Brake Lines
Crown Performance Braided 8.8 Caliper Flex Hose Kit
Crown Performance ZJ E-brake Cables
JB Conversions Super Short SYE
Carolina driveline 1310/1330 Shaft
Metalcloak Aluminum Stubby
Novak NP-231 Shifter Cable
Flat 1/4" skid
Rampage Rear Recovery Bumper/Tire Carrier
ZJ Tie Rod Conversion
Warn Snatch Block
12voltguy Custom 8 Switch Panel
8 OTRATTW Custom Contura V Switches
Blazer (Wal-Mart) 4" LED Tail Lights
Custom (Homemade) LED 3rd Brake Light
Sho-Me LED Flasher
(Amazon find) 4" LED Backup Lights
Blue LED Dash/HVAC/Interior Lights
Kenwood KDC-X395 Head Unit
Nalin Mfg Brackets
Polk DB5251 Dash Component Speakers
Kicker KS525 Pod Coax Speakers
2 JL Audio 10W3V3 Subwoofers
JL Audio XD600/1 Monoblock Amp
Iggee Seat Covers
Very Soon Mods:
BDS 2" Rear Springs - Have
Rear Bilstein 5100 Shocks - Have
12x Cree 3W Rock Lights - Have
Rear Crown Performance Braided Brake Lines - Have
CJ tailgate - Have
Wagoneer 44 - Have
TnT Wagoneer 44 Truss kit - Have
706528x Chevy Small Bearing Spindles - Have
'70's Ford Bronco/F150 Hub/Rotor Assemblies - Have
Dana 44 4.88 R&P - Have
Dana 44 Lockrite - Have
Warn Dana 44 Premium locking hubs - Have
Superior 8.8 4.88 R&P - Have
Dana 44 Master Install Kit - Have
ECGS 8.8 Master Install Kit - Have
TEN Factory MG22174 Wagoneer 44 Axle Kit
Ruffstuff 7/8" Heim Steering
Hutchinson CJ Rock Monster Beadlocks
37x12.5x17 Falken Wildpeak MT's
Metalcloak 4" Fenders
Metalcloak Extended Stretch Armor
3-link/Triangulated 4-link/stretch (Metalcloak Duroflex joints)
Fox Reservoir 12" travel shocks
T&T Outboard kit
OX locker rear
VIAIR Onboard Air
JW Speaker 8700 Evolution LED Headlights
Rigid Industries LED's
LS3 376/480 Hot Cam Crate Engine
Rockland Standard Gear Terminator AX15 Trans
Buncha swap parts from Novak and Chevy Performance.
Current Pics (As of 2/28/14):
And a couple badass pics for the hell of it:
|02-23-2014 09:56 AM|
|02-23-2014 09:34 AM|
|02-23-2014 09:10 AM|
|02-23-2014 09:06 AM|
|02-23-2014 08:51 AM|
|02-22-2014 10:20 PM|
|02-22-2014 10:19 PM|
The 10A has also had some work done. Sitting on 285/75/R17 Terra Grapplers with gutter guard grill mesh, Red Half Spiderwebshade, Black Stubby CB-Style Antenna, Lange Winch-style Hardtop Hoist, Skinny Pedal door hangers and something else I'm forgetting. Plans for AEV 2.5" lift, Warn Zeon 10-S winch, and several products to supplement those.
|02-22-2014 10:08 PM|
|DoubleOught||Nice rig, Nice work. Love the solar yellow!|
|02-22-2014 10:02 PM|
Lets see, since this, I:
- Replaced a ton of parts (Windshield, Centering yoke, Axle u-joints, Water Pump, TPS, Power Steering line, lots of bolts, ect.)
- Bent tie rod and installed ZJ tie rod
- Installed 3" BDS front springs and Bilstein 5100's. Have 2" rears and Bilsteins waiting to go on.
- Installed Metalcloak Rockers
- Installed Walker Cat
- Installed Flat Skid
- Installed 12voltguy Custom Switch Panel, OTRATTW Custom Contura V Switches, Blue Sea Systems Fuse Block, 12voltguy In-Cab winch Harness, Sho-Me LED Flasher, and a bunch of wiring stuff
- Installed Crown Performance 3-4" Lift Braided Brake Line
- Painted Flares
|10-23-2013 06:24 PM|
So I don't really update this thread anymore. I'm on Jeepforum more often than not and keep that thread current.
Anyway, the replacement tranny only lasted a week or two before catastrophic failure, so I replaced that one myself and drove the YJ to work while I had it torn apart. Got it buttoned up in a few days and have had no trouble with this trans, although it isn't quite as smooth as the stock one.
Also, to summarize, cut a flat skid out of 1/4" sheet, retapped my fucked up skid nutserts, fixed a control arm bolt that sheared off while driving, bought a ton of electrical stuff that I haven't had time to install (Custom switch panel, 8 Contura V switches, Blue Seas fuse panel, winch in-cab harness, ect.), got some Metalcloak sliders, wheeled it, dented the rocker (haven't mounted sliders yet), and discovered the RC bushings in the RC/MC hybrid arms are FUBAR'd and the Jeep is out of action. Replacement Energy bushings are on the way.
Oh, and dad traded is Hemi WK2 for this:
|06-12-2013 07:33 PM|
Haven't been on the ole WF in a while. Anyways, since the last update, the rig got a replacement tranny.
And if anyone is interested, I'm trying to get a group to go to Richland Road in Lenoir this Saturday. Need 2 more rigs going to make it what I consider worthwhile. Shoot me an email at firstname.lastname@example.org if interested or comment on the JF thread HERE, because lord knows I won't see it here.
|04-03-2013 06:12 PM|
So, yeah, slack as always. Since I last posted here, I got the front 4.10 LSD 30 swapped in and got the rear shaft installed, after stripping the wrong expensive as shit bolts Ford sold me. Got some hex heads that fit perfectly from Lowes but I'll swap them (Grade 8.8) with some 12 point (Grade 12.9) correct bolts from Knowwhere2Jeep.
I took it wheeling this past weekend at the Uwharrie Spring OHV Jamboree with family and local forum guys. We ended up having a big crew. Videos:
Falls Dam - Flatwoods to Art Lilley - YouTube
Dutch John - Art Lilley to the hill climb (1st half) - YouTube
Dutch John - Art Lilley to the hill climb (2nd half) - YouTube
Slab Pile/Rocky Mountain Loop - Dutch John to Daniel (1st half) - YouTube
Slab Pile/Rocky Mountain Loop - Dutch John to Daniel (2nd half) - YouTube
Slab Pile/Saw Mill - Wolf Den to RML - YouTube
Small hill climb on upper Daniel - YouTube
On the way home I started having terrible vibes. Had to pull the rear shaft. I think it just needs greased. The CV joint is maxed out with my tucked driveline and the pinion is set as high as possible with fixed lowers.
|03-16-2013 10:14 AM|
|03-16-2013 10:05 AM|
|03-16-2013 09:59 AM|
#1 Parts began rusting from the start. The 4 latch nuts all rusted and I painted 2 of them. The big bolt that holds the wheel on also began rusting. Painted it too.
#2 That big bolt hits the tailgate when fully closed and latched. It got even worse when I did the BL. My tailgate was already trashed from a rear-ending so it doesn't matter all that much to me but it could certainly affect someone else.
This bumper has a short life left on my Jeep. Once I'm ready for the CJ tailgate, it's history. I'm going to try and have a new steel crossmember built to weld onto the end of the frame with provisions to bolt on a JK 4-bolt hitch when I need to tow, but have a high clearance crossmember any other time.
|03-16-2013 12:49 AM|
[QUOTE="sjones26573;2915020"]Some pics of my new Rampage bumper
How do you like your bumper? I'm trying to find a cheap but good one.
|03-15-2013 11:34 PM|
Picked up a tailgate.
|03-14-2013 02:17 PM|
|03-14-2013 02:14 PM|
|03-14-2013 11:43 AM|
|Mistermoose||I'm trying to figure out what that cake has to do with the ravens.|
|03-14-2013 08:20 AM|
|03-13-2013 08:24 PM|
I'll have to check my fan should again when I work on my cross member then to see how much I will have to move that. You should throw up some pics of everything then if you can. This is a decent build, for WF
|03-13-2013 07:30 PM|
|03-13-2013 07:25 PM|
|03-13-2013 07:23 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|