|08-01-2014 06:16 AM|
Bringing and old thread back to life, I just installed the RE 2.5 on my YJ. I can't fathom how anyone without air tools can install any lift kit. Air is a must. And make sure you have heat. Front and rear brakes need to be bled, and those brake lines will probably need to be heated to crack them open. So far we have about 7 hours into the project. Definitely not for beginners who only own a set of socket wrenches.
Pretty straightforward install, but this kit really needs to include the rear shock reloc brackets. (RE2007) Order them when you order the kit, otherwise, you will delay the completion of the project a couple of days. You need them. For an $800 kit, they should have included the $30 brackets.
Also, if you are like me living in a rust zone, you are going to have to cut the old leaf spring frame bolts off, so be prepared to have four 4 1/2" Grade 8 9/16 bolts, nuts and lock washers ready to go.
There are always a couple of snags along the way, like you will need to enlarge the holes in the frame where the spring center pins fit, as the new springs' center pins are larger than stock. You will also need a new bolt/nut to connect the front sway bar to the included bracket. That bracket also needs to be enlarged. If you just order the kit, don't expect to finish the job without ordering a couple of bolts, nuts, and the brackets. Too bad whoever assembled the parts list for the kit probably never did an actual install to see what was really needed.
|10-29-2012 09:14 PM|
The Rusty's kit looks good, but I'm not sure how good 31" tires are gonna look on a 4" lift. I'm driving a 2.5L so 33s will suck for me as I drive it to work and back.
Now that I think about it, a RE 2.5" lift with 5/8" shackles gets close to 4" of lift.
|10-28-2012 11:06 PM|
|Gunz n tractorz|
|10-28-2012 11:02 PM|
|Gunz n tractorz||Heard good stuff about the rubicon express, but I went with rustys offroad and got mine. Love it! No sagging and comes with everything u need. All of the other people that I jeep with have a rustys lift and $17000 or more in their jeeps and have tryed many different lifts.|
|10-28-2012 10:57 PM|
|bdavid||Had RE on my tj. To be honest I was not impressed with the quality. The bushings were toast in a short time and all the heim joints were seized after a couple good winters. I greased them but they still went to poop.|
|10-28-2012 10:21 PM|
|tigerblood||I have the RE 2.5 in my garage waiting to go on when I have some free time, I did order the shock relocation brackets and they are pretty beefy, dont know if Im going to need them or not, but I didnt want to get to that point, need them, but not have them.|
|10-24-2012 07:08 PM|
btw my avatar is bald 31" tires on 4.5 lift
|10-24-2012 07:05 PM|
|10-24-2012 06:59 PM|
|amerdt4||I just flipped mine and was all good . No bracket|
|10-24-2012 06:46 PM|
I wonder if those relocation brackets are beefy, or will it be a very weak link in the whole scheme of things?
|10-24-2012 03:22 PM|
What are you going to do with the springs once you decide to go soa?
3"springs on soa? HUGE !
Originally Posted by banks316
TC drop cause your cheap and just want your Jeep to look cool with big tires.
ahhh sounds smart.... haha
1" tc drop doesn't kill your ground clearence and doing a cv shaft gives you more moving parts to break and fail . So yea Im cool cause saved $800 .
|10-24-2012 11:04 AM|
|10-24-2012 10:59 AM|
|10-24-2012 10:09 AM|
|10-24-2012 09:51 AM|
|banks316||Im running the RE 1.5" SOA spring they are awesome. RE makes good springs, Ill be using a pair of them when I start my off road trailer build. When you do your SOA later check them out.|
|10-24-2012 09:40 AM|
I think 31" tires are going to look goofy with a 4.5" lift, though. With my stock d35, I don't want to go larger. In a year or two, I plan on going SOA with a Ford 8.8 or d44 and a regear. Then the 35s go on.
I'm running a 4banger 5 speed and it's my DD for now, so big tires without a regear will suck.
|10-24-2012 06:31 AM|
|amerdt4||I had the RE5520 on my last jeep , quality kit ! Springs rode real nice and NEVER had a problem . The directions were straight foward , but I did have to call for a few questions . The rep was helpful (to me ) . That kit is 4.5" of lift and I NEVER installed sye or cv shaft . I wheeled it hard and never has any issues . If you install degree shims with a tc drop no need for sye/cv . Saves alot of $$$$$$$$$$$$|
|10-23-2012 09:13 PM|
I'm leaning towards the RE kit. I've read several accounts of how their shocks are too fat and rub the axle tube in the rear. But, they have brackets to fix/relocate.
Hopefully I can do the 2.5" lift plus RE 1" shackles and not have to worry about getting a SYE/CV setup.
|10-23-2012 08:37 PM|
I have installed both. I have the Zone 2" on mine. No transfer case drop as the springs come with tapered shims. You can get the Zone lift shipped for under $500 and comes with cheap shocks. They still ride good and are what comes with most lifts without upgrading.
RubiconExpress makes some great stuff, and I have always been happy with their quality. But the Zone fit my budget better this go round on my YJ
|10-23-2012 07:02 PM|
|Tarby||I have had the RE 2.5 lift, and I copied the same setup as the old extreme 2.5 (they don't make it anymore) that JP magazine did...3 years have gone by and not a problem and smoother than stock ever was. I got my kit when they were still independent...before the buyout from 4WD...and had no problem with customer service with questions me and my friend had putting it together. Totally happy with RE...|
|10-23-2012 05:52 PM|
|rykemc||I got the RE 4.5 E.D lift and although I have not ran the jeep yet with it on, I must say I am very impressed with the quality.|
|10-23-2012 05:50 PM|
|95YamJam||RE has a great rep but bad customer svc. Thats just what i have heard/read.|
|10-23-2012 03:49 PM|
Rubicon Express or Zone Lift?
I'm about to do a 2-3" lift and I've narrowed things down to either the nearly complete kit from Rubicon Express (plus shackles), or a Zone kit plus adding on 1" shackles, extended brake lines, and shackle bushings. I'll probably need a tcase drop with the zone, too, and I like the bar type instead of individual spacers.
The costs between the two options above are similar. I guess it comes down to spring and shock quality.
What's your opinion? Am I overlooking another brand that fits a budget of $800?