|11-02-2006 10:08 PM|
|ChilliRed||Yea im pretty happy. As soon as i pull everything out of the old 30 i will have spares for just about everything, i got some new u joints too just in case haha|
|11-02-2006 09:36 PM|
|11-02-2006 09:25 PM|
|11-02-2006 09:23 PM|
I put one in mine because I got a HP 30 out of a cherokee with 100k miles on it. I had no idea what kind of condition that axle was in. That's why I bought a new shaft and case. I was also gearing that axle at the same time so mine was a more logical decision.
|11-02-2006 09:20 PM|
|11-02-2006 09:12 PM|
|MR.CLIFFORD||I wouldn't. I bought a hardened cross shaft from Randy's ring and pinion.|
|11-02-2006 09:09 PM|
|ChilliRed||if i get one it will be an aussie most likely, they dont appear to come with a new cross shaft, can i find one at the local napa?|
|11-02-2006 09:02 PM|
|MR.CLIFFORD||I have a lock right in my wifes HPD30. I replaced the carrier just for peace of mind and got a new cross shaft.|
|11-02-2006 08:48 PM|
|11-02-2006 08:46 PM|
same part should fit both they both use the same carrier and have the same spline count. here is a good link for install help
I used this when I installed mine. i did not even use the directions that came with it.
|11-02-2006 08:38 PM|
Lunchbox in an HP30?
Anyone know if a lunchbox locker ie. lockrite, aussie will fit in a high pinion dana 30? I only ever see lunchboxs for sale for the dana 30 with no option for high pinion so I was just wondering since it is an upgrade i might do someday.