|11-11-2012 08:25 PM|
|Flyngolfjm||When you pull the motor can you just disconnect the tranny from the motor or do you have to drop the tranny and transfer case also|
|11-06-2012 09:44 PM|
|11-04-2012 08:53 PM|
I had a 96 Cherokee Country, the label on the side said it was a 4.0 "High Output"
Was there a difference in the 4.0's It seemed to have more power than my 97 4.0 TJ
|11-04-2012 04:41 PM|
|11-03-2012 06:48 AM|
|kodiakjoe1978||We had to swap my 4.0 out of my 03 tj earlier this year. The only one I could find for a decent price was out of a wj the main difference that we noticed was the water pump on the Cherokee is electric so we couldn't use the clutch fan on it. Someone on this site told me what years would work for mine. I'm not sure I'd have to go search my threads to see but there's differences from the years and model's. I can look and see if you need me to?|
|11-02-2012 09:39 PM|
From a pure legality aspect, the Feds want the same year or newer engine - so putting in an earlier engine causes you to fail initial inspection in any state that does smog testing. Even if that doesn't include your state, it would prohibit you from selling or registering the vehicle in a state that inspects.
|11-02-2012 06:10 PM|
|11-02-2012 05:39 PM|
|YHSublime||This doesn't really answer your question, but might put you on the right path. I talked to an junkyard this past weekend, and the guy there told me for my 1998 I-6, I could swap out with 97, 98 Cherokee parts (From an I-6 as well) because apparently they were the same engines.|
|11-02-2012 05:33 PM|
|danhauer||took a look at that website, I couldn't found anything to help me. the closest thing I've found to what I'm looking for is 4.0 out of 99' WJ. does anyone have advice on any conversions I will need for dropping this one in?|
|11-02-2012 03:27 AM|
Check out a site called novak-adapt.com
Whole website is devoted to engine swaps.
|11-02-2012 12:35 AM|
|11-02-2012 12:15 AM|
|danhauer||Alrighty found a 4.0 out of a 91' Cherokee for dirt cheap, would it be possible to drop it in?|
|11-01-2012 05:29 PM|
|jherrington||i beleive the grand cherokees have the same engine.|
|11-01-2012 01:53 PM|
|hmiller||from an 02 tj|
|11-01-2012 01:52 PM|
|11-01-2012 01:50 PM|
for a 2000 TJ, you'll need a 00-06 block from a WJ or TJ. There are differences from the earlier versions...for example, the heads are different and the water pumps are different from what you have now.
I'd shoot for a 02-04 if possible. That should ensure you get a TUPY revision 0331 head, with the tapped bosses for the coil rail, and all the sensors should be the same.
|11-01-2012 01:43 PM|
|Wattapunk||As long as it's an inline 6, you are ok. Just transfer over the heads and the rest of the bolt on stuff to the new block. Wranglers uses that motor up until 2006. Not totally sure on cherokees but I think early 90's to 2002 on those.|
|10-31-2012 11:35 PM|
TJ Engine Swap
I threw a rod in my 4.0 I6 (00' TJ) and I wanting to know if any AMC 4.0 will work for a swap, I know that Jeep has been using the 4.0 for a long time and if all will work whether out of a Cherokee or earlier model Wranglers?