|11-04-2012 05:24 AM|
|SeaComms||There is nothing that can help you shift into a higher gear faster than the box will allow anyway. The synchros take a while to spin up and 1st to 6th or even just to 4th is going to be a slow change no matter what you do to the shifter.|
|11-03-2012 08:39 PM|
|Reef||AAh the defender got to love it.|
|11-03-2012 08:04 PM|
Something along these lines is what I am talking about. Of corse this is not me 1 I drive a jeep, 2 I stoped riding the brakes a long time ago.
Steep hill decent with Defender in Freizetpark Mammut May 2009 - YouTube
I looked around today and still couldnt find anything like I want
|11-03-2012 02:06 PM|
Sure I could use a strap... when there are other vehicles around.
Just pushing in the clutch dosent allways work, say you are in a spot that your front bumper is on the ground if you just dump the clutch the jeep is eather going to not move or the bumper hiting might make it spin you to one side. This is what I have seen in my jeep at least, still learning something every time I go out.(or trying to at least)
|11-03-2012 01:19 PM|
Going down hill, needing to build speed to avoid the back end from flipping over the front?
Press in the clutch.
Or can you have a tow strap attached to the back of your jeep and held by people / another vehicle to catch you if you start to go over?
- Keith -
|11-02-2012 11:53 PM|
The explanation helps.
|11-01-2012 09:25 PM|
|paleh0rse||I too would really love to know the answer to his original question...|
|11-01-2012 09:03 PM|
|WatchThis!||1st low. This happens when going down extremely step hills(80° or so) and droping off ledges.|
|11-01-2012 09:00 PM|
Seeing that you have a Rubicon, and I take it that you're in 4 low with the F/R lockers on, but what gear are you in?
You can do two things. Start off and leave it in a higher gear. 3rd works good for me, or you can jump out the lockers to work in 4 high and any TC selection.
|11-01-2012 08:17 PM|
|WatchThis!||No, still rocking the stock ones for now. A sway bar swap is down way low on my list of things to do since the setup is working great for me as it is.|
|11-01-2012 08:12 PM|
|11-01-2012 07:51 PM|
|WatchThis!||I guess I better explain myself a bit. Some times I tend to put myself in situations where the back tires come off the ground. In cases like this I have to gas the hell out of it to keep bad things from happening. The only problem is that I am so low geared that putting it on the floor won't make the jeep accelerate any, so I have to floor it find a higher gear and dump the clutch as fast as I can. Trust me this is a nerve racking maneuver and having to worry about getting it in another gear makes it even worse.|
|11-01-2012 07:42 PM|
|11-01-2012 07:40 PM|
|WatchThis!||No actually that is what I need to do.|
|11-01-2012 07:01 PM|
|jadmt||I doubt you meant it to read this way but it reads like you want to shift from 1st to 4th or 6th skipping 2nd, 3rd and/or 5th. I think that is why you got the eek|
|11-01-2012 06:56 PM|
|Blastek||jeep and hurry usually don't go hand in hand. especially with this trans|
|11-01-2012 06:53 PM|
|WatchThis!||Why the ?|
|11-01-2012 06:49 PM|
|11-01-2012 04:04 PM|
|WatchThis!||Glad that I noticed spell check fooled me into messing the title up. Can a mod fix that when they come across this thread please?|
|11-01-2012 04:03 PM|
Aftermarket shifted for 6 speed?
I remember seeing a thread about this a while back but I couldn't find it, so i will start a new one.
Has anyone found a shifter that is an improvement on the factory one? There has been a few times that I have had to go from 1st to either 4'th or 6'th in a hurry. Today when I had to do it my I ended up missing both of them almost making a good morning of wheeling and shooting with my dad turn into a long morning of recovering my jeep.
I have looked a bit but haven't been able to find anything yet.