|05-01-2013 08:46 AM|
|Bielzebub||It was also recommended to me that I visit Fastenal here in town and they could probably help me. I hope so, the spot where those small flares is UGLY!|
|05-01-2013 08:12 AM|
i just used regular bolts
no nuts on other end
i think they were like 1/4"
works fine, easy
|05-01-2013 07:54 AM|
|05-01-2013 07:53 AM|
|Bielzebub||I am having the same issues. I removed my stock flares and replaced them, but the stupid hardware that comes on it with those rivet bolts or whatever rusted out and I ended up popping them out. The only problem that I am having now is attempting to put them back on. I was able to get the large flares on, but the small "dressing" flares that go behind the fronts I am having trouble with. The two holes toward the back of the smaller flare are inside the cab, but are covered by sheet metal inside. I know they make anchors or something, but I am trying to figure out the best thing to use so that I can cover up the unsightly holes I made ripping the rivet bolts out. any suggestions?|
|11-03-2012 04:25 PM|
|Randens Rubi||Way too much of a pain to remove them. I bed lined mine as well but just taped around them and used news papers and such. They turned out great. Next bed lining project is the hardtop.|
|11-03-2012 03:39 PM|
|JVLemur||I'm down to about 20 mins a piece and multiple scratches on my arm. To paint them I'd just wrap newspaper all around and spray them on the body. Too much a hassle to just for some bedliner, and plastidip is cheaper haha.|
|11-03-2012 03:36 PM|
|Jwolfer||It took me about 2 hours longer than it should have just because they are such a pain!|
|11-03-2012 03:35 PM|
|JVLemur||Subbed, they're a pain! No space to work with at all.|
|11-03-2012 03:32 PM|
Best fender flare replacement hardware?
After struggling with the fender flares I finally got them off. I am just bedlining them so I need to put them back on once I finish but I don't want to deal with the frustration of the stock hardware. Does anyone have any good suggestions? I can't weld or anything so any recommendations are appreciated.