|11-05-2012 08:11 PM|
|Neil30076||My 94 had the same issue when I bought it, turned out the PO put 8qts of oil in the sump!|
|11-05-2012 07:16 PM|
|1v6pony||If you check the CCV or what is also the PCV, it is a brass conector on the valve cover... Do yourseld a favor, remove the valve cover and then remove the smaller covers in the valve cover, I just did this and mine were completley blocked, i was haveing all kinds of blow by.... one is the fresh air and one is the CCV... they help to equalize the pressure in the engine...|
|11-05-2012 03:54 PM|
|dino_yj||Haha no. I've only had the jeep 2600 short miles... Ugh... I guess the PO didn't enlighten me to the full reason he was selling... Ugh makes me sick.|
|11-04-2012 05:00 PM|
|11-04-2012 04:29 PM|
|Bart113000||Did this happen after driving off road....my 93 did pretty much the same thing, and it turned out that I had dented my oil pan up enough that it forced some pretty massive blowby.... my fix was to drop the pan and pound out the dent....and replace my bump stops that had totally rotted away which allowed my oil pan to be dented!|
|11-04-2012 01:24 PM|
|dino_yj||I found the info very useful on Chevrolet & GM Engine Conversions in the Jeep YJ Wrangler ... But if I keep the jeep and swap motor I might like a 4.3 or small v8... However I would like to retain a straight shift trans. Mine isn't up to it, any suggestions?|
|11-03-2012 11:38 PM|
|2fastc||I would run a compression check because sounds like you might have burnt a hole in a piston.|
|11-03-2012 10:28 PM|
|dino_yj||Still has good oil pressure...|
|11-03-2012 10:23 PM|
|dino_yj||Engine has 170 k ... I did not notice any pcv valve in the tube on valve cover... I thought that odd.. either way I'm not exaggerating.... Oil was filling my breather... Filter was literally soaked.. I assume the missfire was from oil soaked plugs... Something has let go, what u think and what's options... I haven't had my jeep long, and love it... But money ain't free... What does interest me is a 4.3 swap.... What years/trans/tcase are suitable and is this a moderate or super hard swap? Ugh thanks|
|11-03-2012 10:04 PM|
Not always someone was on here the other day and it was too much oil after a change. So how much oil is in there some is acceptable because as the vapors cool they revert back to liquid. It could be a worn engine how many miles???
I just changed my oil tonight and I bought the jug which is actually 5 litres which is a lot more than 4 quarts so check the oil level on the stick first. Then clean everything up and check you PCV or CCV and clean that. Check all the vacuum lines to make sure they are in goood shape.
Like I said some is accetable if it loooks like a drain ppan then there are some issues but not the end of the world yet.
Read the attached.
|11-03-2012 09:59 PM|
|DasfieldmarshelsYJ||Blew the oil pump|
|11-03-2012 09:25 PM|
worst week... 2.5 massive blowby .. oil soaked breather
93 yj 2.5 170k .. started missing. Got home. Looked under hood... Oil leaking out of breather box, opened it and its FILLED with oil.... Massive blowby ! This means toasted motor probably? Bad rings or lifters? I read on http://www.wranglerforum.com/f8/oh-n...ne-162792.html about a mentioned problem and jeep program for these motors? Maybe bad lifters? I'm not sure what it said.... Anyways ... Information... Help... And donations are accepted...