|12-01-2012 11:40 AM|
|Normus||So, in addition to some other things, I was able to get the exterior handle in, smooth as silk. I have it all set up, but it does not appear to be operating correctly. Any suggestions?|
|11-11-2012 09:54 AM|
|11-10-2012 03:35 PM|
Yeah it was difficult to say the least but a little patience something I don't have. If I remember correctly it took me like an hour too figure that out
Take look here just posted by jokerandthief great writeup
"Gaucho" CJ stepside pickup build - Page 67 - JeepForum.com
|11-10-2012 02:28 PM|
When I order the replacement ones, how do
I put them on? I have tried to get the old ones back on, as a means of practice, but it is proving quite difficult.
|11-04-2012 10:00 PM|
|jokerchief462||From the inside you will see two wedges that hold it tight to the door panel along with the hookup for linkage. They have like a serrated edge on them.|
|11-04-2012 01:05 PM|
Exterior Door Handles
I know there has got to be at least a few write ups on this site regarding the removal of the exterior door handles, but I was hoping someone could point me in the direction of one more directly geared to a 95 with zero luxury features. I don't know if it makes a difference or not, but I will try to get a picture of the door, as seen from the inside, to upload here.