|10-11-2014 01:35 PM|
ARB air compressor installed today. Used the Synergy under hood mount. Compressor is nice and came with great instructions, The Synergy instructions were online. The Synergy bracket went in easily with a little elbow and hose to clear the brake Booster line.
The kit fit well and I used parts of the ARB harness but still wired it through my home made Dbox. The only thing I was disappointed with was the fact that I had to buy a Tfitting to work the pressure cut off and hose fitting together. Cheap parts but it would have been nice if included.
I've aired up all my vehicles, bicycles and pool rafts.... What now?
Thanks Will at LOL4x4!
|09-01-2014 02:22 PM|
|JerryJeepster||You guys are killing me! Er should I say going to kill my bank account. I'm going to have to get my butt moving on my rebuild so I can be like you guys!|
|09-01-2014 01:31 PM|
|88Hatchy||I set them at 35|
|08-31-2014 10:38 PM|
|fljeepleo||I'm embarrassed to admit this but I haven't checked them since I left the shop. Whatever they are now feels pretty good.|
|08-31-2014 06:44 PM|
|tabber02||what are you running tire pressure wise? you're a little heavier than me... curious what you settled on.|
|08-31-2014 07:15 AM|
|08-31-2014 07:12 AM|
|08-30-2014 07:20 PM|
|08-30-2014 06:59 PM|
When you and Bob and Oscar get together, make sure you all for me, too!
Have a great time! Hope you guys take lots of pictures!
|08-30-2014 04:29 PM|
It has a good stance to it now.
|08-30-2014 04:23 PM|
|fljeepleo||Heading to the Sheriff's Jeep fest on Monday so we'll see what kind of gas mileage I get.|
|08-30-2014 04:22 PM|
|fljeepleo||Thanks, I really am surprised it isn't as noticeable while driving as I thought it would be. I can barely tell the difference from my 35s|
|08-29-2014 09:40 PM|
|08-29-2014 04:18 PM|
Well with some minor trimming to the inner fender the 37s fit at full flex.
I'm still running the manual with 4.10 gearing and 6th gear is still usable. Regear in the future.
37x13.50R17 TOYO MT
|08-24-2014 08:49 PM|
|08-23-2014 11:28 PM|
|fljeepleo||We should be having this conversation in Bob's build thread.|
|08-23-2014 11:27 PM|
|fljeepleo||That was a Frankenstein Dana 30, that Tera44 is super sexy.|
|08-23-2014 08:11 PM|
|88Hatchy||I hear there is a Dana 30 that survived 37" tires for over a year.|
|08-23-2014 08:00 PM|
|JerryJeepster||I do believe they are! I should bite the bullet and pull a Bob with mine. That would be a tereflex axle! I hate to put any money into this wimpy d30!|
|08-23-2014 07:51 PM|
|elclipo||Are the JK ball joints that sucky? I have to change mine but they're 14 years old and have 120+ thousand miles.|
|08-23-2014 05:27 PM|
|JerryJeepster||Looking great! 23K miles and my ball joints are shot.|
|08-22-2014 08:55 PM|
|tabber02||looking good brother. has the stamp, ready for Georgia!|
|08-22-2014 04:29 PM|
|fljeepleo||I have to say, the synergy ball joints made a big difference. Amazing how the stock ones got so sloppy in just two years.|
|08-22-2014 04:27 PM|
Thanks to Bob, Will and Darrel I switched out the blue winch line to gray and the Teraflex diff cover is installed.
|08-21-2014 07:42 PM|
|08-21-2014 07:34 PM|
|08-21-2014 08:18 AM|
i heard something about a new TeraFlex front diff cover and some winch line replacement going on tomorrow...
|08-21-2014 06:34 AM|
|trekguy||good looking jeep - thanks for the post and ideas|
|08-20-2014 11:57 AM|
|08-19-2014 04:35 PM|
|fljeepleo||Synergy Ball Joints installed.|
|This thread has more than 30 replies. Click here to review the whole thread.|