|11-28-2012 02:15 PM|
Also go a chance to try out the hitch on the LOD bumper... Looks like my next mod is airbags in the rear springs.. and a color change for my DRZ !
The weight of the bike and carrier caused the shifter to make contact with the dash console!!
|11-28-2012 08:44 AM|
|11-28-2012 08:44 AM|
Also installed "black rock" center hub covers.. really cleaned up the look of the wheels, not sure why these were not on there before...
Also funny side note, the covers say BLACK ROCK and below that it says Made in The USA all stamped in the steel.. then on the inside of the cover there is a sticker that says "made in china" WTF!! LMFAO
|11-28-2012 08:38 AM|
|endlesshydro||The Power switch and air pressure gauge is mounted in the dash top pod... Must say i like the position, but the fit and finish of the dash pod is less then desireable. same goes for the pillar pod gauge pod (not pictured)|
|11-28-2012 08:36 AM|
|11-28-2012 08:35 AM|
So finally got the Viair system, installed it last weekend, wasnt crazy about the mounting location but it has its perks, my old setup was on the fender well and that seemed to hinder rear seat space. Which was never an issue however this year were rolling with a babyseat and more gear for the baby then for recovery!
The Benifits of the mounting position (even tho it looks like i took the easy road) are
The drain on the tank is easy to get to and actually drain cause it hangs over some dead space.
The pump is off the floor away from any possible water intrusion
I get to keep the speaker box. (more on this below)
The Pump should stay a bit cooler.
Access to the tank is extremely easy.
Ok so the deal with the speakerbox... It was in the truck when i bought it, never a mod i would do in a jeep however it was already there and i have been enjoying it more then i thought i would. So to make it more senceable i removed one of the subs it was making a crackling noise anyway, that exposed a decent size void in the box. So now i will close up the big hole where the speaker was and cut a door into the back of that side of the box. Creating a small tool box or equiptment storage box! Pics to come soon.. as this idea is still in the planning stages.
|11-14-2012 07:10 AM|
I had these exact ones on my first jeep never gave me a problem and there super cheap to boot!
i get them from here, walmart sells them to but here is cheaper...
buy a 4 1/2" hole saw from lowes or home depot, or a air saw...
|11-14-2012 07:05 AM|
Wow Good eye!! Thanks! there were absoultly no instructions with them LOL then again i guess your not supposed to need them if your buying 150 disco's LMAO..
|11-13-2012 12:37 PM|
Your disconnects are not on properly.
I don't have a picture of mine, but it shows the hoop over the sway bar end. Nice jeep though.
|11-13-2012 11:16 AM|
|BeerMan||Nice!! Which LED tail lights are those? And, how much, if you don't mind me asking? I'm on my 3rd set of the brittle crappy OEM tail lights and dying to do this mod.|
|11-13-2012 09:49 AM|
The Hoop with the lights on it?> its welded on..
|11-13-2012 09:40 AM|
|hmiller||i no thats a Warn front bumper but what is the thing coming up from it that guards the grill?? i love it|
|11-13-2012 09:25 AM|
Thanks! No not trimmed folded over... Technically it's a no no... but im gonna run it till i get a complaint...
Next up is winshield mounted Kc's and rock guards for all the lights..
|11-13-2012 09:18 AM|
|vtjohn||Is that rear license plate trimmed on the right hand side? Like the look of how you have it mounted, but if it is trimmed I couldn't do that here in Va. Like your build so far!|
|11-13-2012 09:07 AM|
|endlesshydro||Well its not exact replica any more but it's heading in the exact direction i wanted my old one to go!|
|11-12-2012 08:42 AM|
|11-12-2012 08:38 AM|
So it was a busy weekend... Finished up a bunch of mods!
JKS Quicker disco's
LOD rear bumper with D-rings
Rear corner armor
Kc lights on tube bar bumper
Engergy suspension swaybar bushings
Rubicon locker mod
install all switches in center dash
not a bad weekend, now to recover!
|11-07-2012 08:07 AM|
So most of the goodies showed up yesterday, plans are to have a building party this coming sunday, and see how much stuff i can get done!
Parts that showed up so far :
JKS quicker disconects
2 sets of KC's
Air vent scoop
LOD rear Bumper
center hub covers
People coming so far:
My boxer (she's usually not much help)
case of yuengling (helps when you need to cut holes in the jeep body)
|11-06-2012 07:36 AM|
|endlesshydro||So the Saga continues, Just dropped about $2400 through Quadratech and man i bet the UPS man is gonna be pissed with me! everything should be showing up in the next few days! Build on!|
|10-22-2012 01:22 PM|
|endlesshydro||Next up LOD rear Bumper !|
|10-20-2012 07:35 PM|
Didnt have these on my old jeep but i like the look of them... there just markers they dont blink
|10-20-2012 07:31 PM|
Swapped out to LED tails today..
|10-19-2012 10:50 AM|
|endlesshydro||Yea i wouldnt mind mixing it up with some other local jeepers, however i have a 1yr old now which limits my trips well at least till next year when i will be more comfortable taking her with me|
|10-19-2012 10:43 AM|
|Irongrave||ahh if you were central or northern I'd tell you to check out North Jersey Jeep Club, lots of good guys and gals in that club|
|10-19-2012 10:32 AM|
|10-19-2012 10:30 AM|
|endlesshydro||Yea agree about the BL.. however i am local to the pines and we just have water water and more water... my old jeep had a 3" BL and that was excessive this one has a 2" so its a tad calmer.. my old jeep had a acutal bildge pump on the floor.. started out as a joke but actually came in handy!|
|10-19-2012 10:29 AM|
|Irongrave||where in NJ are ya?|
|10-19-2012 10:25 AM|
|97flexy||thats cool how you made your old jeep outta some one elses, but you should think about getting rid of that big(2"+) BL for a small Spring lift and a 1 or 1.25" BL.|
|10-19-2012 10:18 AM|
Well the list is long and with the savings on the purchase alot of stuff will be bought right off the bat.
On board air system with external ports
Misc air guages twin tanks
Bolt in cage
Rubion locker switch mods
and tons more
|10-19-2012 10:15 AM|
OLD JEEP FLEXING OUT
|This thread has more than 30 replies. Click here to review the whole thread.|