|06-12-2013 08:41 PM|
|Zed||I'll bump this one too! :-)|
|06-01-2013 01:01 AM|
|05-27-2013 12:45 AM|
|05-26-2013 08:58 PM|
I have the same issue. Anyone know of a skid for the rear bracket of the front lower control arm. Mine are also getting beat up pretty bad.
|11-29-2012 07:34 AM|
|11-28-2012 10:56 PM|
|11-28-2012 10:43 PM|
|SilverSport||Are the bolts torqued to 125 ft lbs?|
|11-28-2012 10:29 PM|
|11-28-2012 10:27 PM|
|11-28-2012 03:57 PM|
I see what you mean Sue.
I guess you could refer to those as front LCA frame-mount skid plates? As opposed to axle-mount LCA skids?
|11-28-2012 02:53 PM|
|Sueby||You mean a skid for the back bracket for the front lower control arm? I have seen them on this forum I think, but I do think it was something someone made themselves. I had a friend mention this to me the other day too, I think he said he had seen them.|
|11-28-2012 02:38 PM|
May have misstated. I always get these mixed up. This is the skid for the control arm attached at the front axel.
I also need to protect the rear bracket for that control arm ( since its getting crushed on rocks) but they don't make one for that.
|11-27-2012 09:30 PM|
I went to the RR website and found no mention of upper control arm skids.
Considering the tie rod, drag link, etc. are lower than the upper control arms, if you need skids for the uppers, you are in some deep shit.
|11-27-2012 09:24 PM|
|ljrubitm||Are you sure you're not talking about the rear lower control arm? I've never heard of upper control arm skids.|
|11-27-2012 08:39 PM|
|11-26-2012 11:53 AM|
What do you think ?
When I grab and pull down I can see the skid move under the bolt.
|11-13-2012 09:16 PM|
|11-13-2012 09:14 PM|
|pluke the 2||Bump. Pics?|
|11-13-2012 02:21 PM|
|11-12-2012 10:12 PM|
RR Control arm skid question
I've already installed Rugged Rige lower control arm skids and love them. BUT today I installed the upper control arm skid front passenger side. Used both RR spacers and washers but I can still wiggle the skid up and down. Does that sound normal to you all? I thought it should be tight.